Bi-Directional - Lektropacks - The UK's Home For AV Accessories

Bi-Directional

PU-305BD-TX - Bi-Directional Digital Audio over Single CAT Transmitter

The PU-305BD-TX transmitter is designed to send digital audio signals up to 300m over CAT5e/6 cable infrastructure. This device is Bi-Directional and supports Digital Optical signals allowing transmission up to 300m at 96KHz sample rate, or 100m at 192KHz sample rate.This extender set also supports RS-232 signals over the same CAT5e/6 cable. The PU-305BD-TX can be powered at either end using the supplied PSU adaptor for added flexibility. Digital audio signals are supported up to a sample rate of 192Khz, and support for LPCM Stereo and Multichannel digital audio (LPCM, DTS, Dolby Digital, Dolby Digital Plus) is also provided.

The PU-305BD-TX is designed to work with the PU-305BD-RX receiver or the PU-305BDA-RX analogue receiver.

The PU-305BD-KIT is perfect for multi-room AV systems where the optical audio from a HDTV or amplifier can be routed back to a rack matrix for further distribution throughout a wider multi-room AV system.

PU-305BDA-RX - Bi-Directional Analogue Audio over Single CAT Receiver

The PU-305BDA-RX is an analogue Stereo over CAT5e/6/7 Receiver which can send and receive analogue audio signals over a single run of CAT5e/6 cable up to 300m. It has the added benefit of RS-232 pass-through allowing control of devices and the Power over Cable (PoC) function can power the receiver unit eliminating the need for a second power supply. As the unit has bi-directional capabilities, this device can also send audio signals back to the connected transmitter.

This receiver is designed to be used with the PU-305BDA-TX Analogue Audio Transmitter or the PU-305BD-TX Digital Audio Transmitter. When combined with the PU-305BD-TX digital transmitter, the analogue audio signal will be converted and outputted as digital audio by the transmitters' built-in digital to analogue converter (DAC).

PU-305BDA-TX - Bi-Directional Analogue Audio over Single CAT Transmitter

The PU-305BDA-TX is an analogue Stereo over CAT5e/6/7 Transmitter which can send and receive analogue audio signals over a single run of CAT5e/6 cable up to 300m. It has the added benefit of RS-232 pass-through allowing control of devices and the Power over Ethernet (PoE) function can power the receiver unit eliminating the need for a second power supply. As the unit has bi-directional capabilities, this device can also receive audio signals back from the connected receiver.

This transmitter is designed to be used with the PU-305BDA-RX Analogue Audio Receiver or the PU-305BD-RX Digital Audio Receiver. When combined with the PU-305BD-RX digital receiver, the analogue audio signal will be converted and outputted as digital audio by the receivers' built-in digital to analogue converter (DAC).

PU-USB-AL-KIT - USB 2.0, Audio & LAN over CAT Extender

The PU-USB-AL-KIT Transceiver is a point-to-point signal extender for USB 2.0, LAN and Analogue Audio over CAT6/7 cables. Ideal for extending USB peripherals from the table in a conference room to wider video conferencing systems such as Zoom, Microsoft Teams and Skype for Business.

The solution is comprised of two PU-USB-AL units connected via CAT6/7 which may be extended up to 100m (330 feet). Bi-directional PoC (power over cable) is supported enabling either side of the system to provide power, perfect for managing power requirements within an installation.

Typically a system can support one USB host and up to 6 USB devices (3 on the transmitter side, and 3 on the receiver side). The USB host is automatically located by the device, alternatively, this can be selected via the front panel buttons.

Return to top show prices Inc. VAT