The
DS-MSC14-4K enables a 4K video wall to be created from any third party screens,
the HDMI source can be displayed as a single image on each screen or 1 image
across all screens. A single unit will create a 2x2 video wall. Multiple units can be combined with an HDMI distribution amp to create larger video wall configurations. Control is via RS-232, Telnet IP and our downloadable application
which will allow full control of the DS-MSC14-4K from adjusting the bezel
correction to pre-set video wall layouts.
The 4K2K 4 by 4 HDMI Matrix over CAT5e/6/7 supports the transmission of video (resolutions up to 4K2K Full HD), multi-channel digital audio from 4 HDMI sources to 4 outputs over a single CAT5e/6/7 cable (up to 60m) for each output. It supports high resolution digital audio formats such as LPCM 7.1CH,Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio as well as 3D content that can be displayed when connecting a 3D TV and 3D source.
This matrix features control via manual selection buttons, IR, RS-232, Telnet or Web GUI. CYP provide control drivers for all the major control systems. This unit also supports UART RS-232 pass-through.The PU-4H4HBTPL-4K is designed to be used with PU-515PL-RX supplied in the kit.
This 4K Matrix Package is supplied with a PU-4H4HBTPL-4K HDBaseT LITE matrix, four PU-515PL-RX HDBaseT LITE Receivers, and one XA-HDCP HDCP Converter. The 4K HDBaseT Matrix allows the transmission of video (resolutions up to 4K2K Full HD), multi-channel digital audio from 4 HDMI sources to 4 outputs over a single CAT5e/6/7 cable (up to 60m) for each output. It supports high resolution digital audio formats such as LPCM 7.1CH,Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio as well as 3D content that can be displayed when connecting a 3D TV and 3D source. This matrix features control via manual selection buttons, IR, RS-232, Telnet or Web GUI. CYP provide control drivers for all the major control systems. This unit also supports UART RS-232 pass-through.
The PU-515PL-RX Receivers supplied enable the user to connect four HDMI screens to each of the four receiver units which utilise Power over Cable (PoC) and do not require separate PSU's for each receiver.
This matrix package also includes a XA-HDCP converter unit. It is designed to be connected to a 4K HDCP2.2 HDMI source and set to convert the output to 4K HDCP1.4 so that the signal can be passed through the matrix to the connected 4K screens. Additional XA-HDCP units can be utilised (at extra cost) to add further 4K HDCP2,2 sources into the system, and thus effectively integrate 4K into a wider AV system where there is no requirement for every device in the signal path to be HDCP2.2 compliant.
The PU-507RX Receiver allows uncompressed HDMI signals and IP data to be received over a Single CAT5e/6/7 cable. This device features full 5-Play convergence allowing the distribution of Video, Audio, LAN serving, Power over Cable (PoC), RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres.
The PU-507TX Transmitter allows uncompressed HDMI signals and IP data to be transmitted over a Single CAT5e/6/7 cable. This device features full 5-Play convergence allowing the distribution of Video, Audio, LAN serving, Power over Ethernet (PoE), RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres.
The PU-507WPRX allows uncompressed HDMI signals and IP data to be transmitted over a Single CAT5e/6/7 cable. This device features full 5Play™ convergence allowing the distribution of Video, Audio, LAN serving, Power over Cable (PoC), RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres. This wall plate variant of the PU-507RX receiver enables seamless integration into a standard double-gang back box.
The PU-514L-RX is a Receiver Unit designed to be used with PU-514L-TX Transmitter, and any compatible HDBaseT™ Matrix or Distribution Amplifier. It allows uncompressed HDMI, and 2-way IR signals to be received via a Single CAT5e/6/7 cable to distances of up to 60m. Utilise the USB power output from a TV as an optional way of powering
the PU-514L-RX receiver unit alternative to a mains power supply.
Compatible devices:
PU-514L-TX / PU-44XL-KIT / PU-4H4HBTL / PU-8H8HBTE / PU-8H8HBT / PU-8H8HBTL
Specific feature compatibility may vary dependant on the transmission device.
The PU-514L-TX is a Transmitter Unit designed to be used with PU-514L-RX Receiver. This device allows uncompressed HDMI, and 2-way IR signals to be transmitted over a Single CAT5e/6/7 cable to distances of up to 60m. Utilise the USB power output from a TV as an optional way of powering
the PU-514L-RX receiver unit alternative to a mains power supply.
The PU-515PL-TX Transmitter allows uncompressed HDMI signals to be transmitted over a Single CAT5e/6/7 cable. This solution has the added features of RS-232, 2-way IR control, and Power over Cable (PoC) functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 60 metres.
The PU-607BD-RX Receiver allows uncompressed HDMI signals and IP data to be received via a Single CAT5e/6/7 cable. This solution has the added features of RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres. This Receiver is designed to be used with the PU-607BD-TX or PU-607BDWP-TX Transmitters only, which enables Bi-Directional Power over Cable (PoC) functionality.
The PU-607BD-TX Transmitter allows uncompressed HDMI signals and IP data to be transmitted over a Single CAT5e/6/7 cable. This solution has the added features of RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres. This Transmitter is designed to be used with the PU-607BD-RX and PU-607BDWP-RX Receivers only, which enables Bi-Directional Power over Cable (PoC) functionality.
The PU-607BDWP-RX Wallplate Receiver allows uncompressed HDMI signals and IP data to be received via a Single CAT5e/6/7 cable. This solution has the added features of RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres. This Receiver is designed to be used with the PU-607BD-TX and PU-607BDWP-TX Transmitters only, which enables Bi-Directional Power over Cable (PoC) functionality.
The PU-607BDWP-TX Wallplate Transmitter allows uncompressed HDMI signals and IP data to be transmitted over a Single CAT5e/6/7 cable. This solution has the added features of RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres. This Transmitter is designed to be used with the PU-607BD-RX and PU-607BDWP-RX Receivers only, which enables Bi-Directional Power over Cable (PoC) functionality.
The 4K2K 8 by 8 HDMI Matrix over CAT5e/6/7 supports the transmission of video (resolutions up to 4K2K Full HD, HDCP 2.2), multi-channel digital audio from 8 HDMI sources to 8 HDBaseT LITE outputs via single CAT5e/6/7 cable up to 60m. The matrix is compatible with high resolution digital audio formats such as LPCM 7.1CH,Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio as well as 3D content that can be displayed when connecting a 3D TV and 3D source. This matrix features control via manual selection buttons, IR, RS-232, Telnet or Web GUI. CYP provide control drivers for all the major control systems. This unit also supports UART RS232 pass-through to the receivers.The PU-8H8HBTPL-4K22 is designed to be used with PU-515PL-RX & PU-515PL-WPRX receivers.
This HDBaseT DVI over CAT5e/6/7 receiver can receive DVI video, analog audio, 2 LAN serving connections, control (RS-232 and bi-directional IR) and Power over Ethernet (PoE) over a single CAT5e/6/7 cable up to 100m. The PU-DVI1109TX transmitter can power the receiver, via the PoC function, eliminating the need for a separate power supply.
This HDBaseT DVI over CAT5e/6/7 transmitter can transmit DVI video, analogue audio, 2 LAN serving connections, control (RS-232 and bi-directional IR) and Power over Cable (PoC) over a single CAT5e/6/7 cable up to 100m. The transmitter can power the PU-DVI1109RX receiver, via the PoC function, eliminating the need for a separate power supply.
The PUV-1082PL-4K22
HDMI/HDBaseT Matrix supports the transmission of video (resolutions up to
4K2K@60Hz, HDCP 2.2, HDMI2.0) and multi-channel digital audio from 10 HDMI
sources to 8 HDBaseT outputs and 2 independent HDMI2.0 outputs. HDBaseT outputs
allow transmission via a single CAT5e/6/7 cable up to 60m, whilst the
independent HDMI outputs support cable lengths of up to 10m. This matrix
supports high resolution digital audio formats such as LPCM 7.1CH,Dolby TrueHD,
Dolby Digital Plus, Dolby Atmos and DTS-HD Master Audio as well as 3D video
content.
The PUV-1082PL-4K22
matrix incorporates an independent audio matrix with 14 audio outputs and 10
audio inputs. These outputs and inputs can also be used for de-embedding
HDMI audio to the audio outputs and embedding audio to the HDBaseT and HDMI
outputs. The audio CAT connections, along with compatible bi-directional
audio modules (PU-305BD-RX & PU-305BDA-RX) allow integration with remote
sources and remote audio zones. In addition, volume, mute, treble, bass
and audio lip-sync correction control are available on all direct
audio outputs. Optical Audio Return (OAR) Technology allows the optical input
on the PUV-1230PL-RX receiver to be routed back to the audio matrix.
The matrix has a
built-in pattern generator which can be used to verify the video signal on any
of its 10 output ports. The Power over HDBaseT (PoH) function provides power to
compatible receivers.
Control is via manual selection
buttons, IR, RS-232, Telnet or Web GUI. CYP provide control drivers for all the
major control systems. The PUV-1082PL-4K22 is designed to be used with PUV-1230PL-RX or
PUV-1210PL-RX receivers that can utilise the PoH capabilities of the matrix.
The PUV-1510RX Receiver will accept transmitted video resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT), and LAN signals up to 100m. This solution provides advanced signal management ensuring reliable results in the most demanding installation environments. All audio, video, control, and power are received simultaneously over a single CAT6a/7 cable up to 100m.
The PUV-1510TX Transmitter enables transmission of video resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT), and LAN signals up to 100m. This solution provides advanced signal management ensuring reliable results in the most demanding installation environments. All audio, video, control, and power are transmitted simultaneously over a single CAT6a/7 cable up to 100m.
The PU-1530RX Receiver will accept transmitted video resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT), OAR (Optical Audio Return), and LAN signals up to 100m. This solution provides advanced signal management ensuring reliable results in the most demanding installation environments. All audio, video, control, and power are received simultaneously over a single CAT6a/7 cable up to 100m.
The PU-1530TX Transmitter enables transmission of video resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT), OAR (Optical Audio Return), and LAN signals up to 100m. This solution provides advanced signal management ensuring reliable results in the most demanding installation environments. All audio, video, control, and power are transmitted simultaneously over a single CAT6a/7 cable up to 100m.
The PUV-2000RX Slimline Receiver supports video resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT), and LAN signals up to 100m. Utilising the latest HDBaseT™ 2.0 technology, this solution provides advanced signal management and dedicated audio pathways to ensure reliable results in the most demanding installation environments. In addition to the full 5-Play convergence, this device also incorporates OAR (Optical Audio Return) and ARC (Audio Return Channel) functions which enable audio from a compatible display to be routed back from the receiver unit to the transmitter. All audio, video, control, and power are transmitted simultaneously over a single CAT6a/7 cable up to 100m.
All of these features are encorporated into an ultra slim casing (less than 18mm thick), providing unrivalled flexibility and ease of installation.
The PUV-2000TX Slimline Transmitter enables transmission
of video resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT), and LAN signals up to 100m. Utilising the latest HDBaseT™ 2.0 technology, this solution provides advanced signal management and dedicated audio pathways to ensure reliable results in the most demanding installation environments. In addition to the full 5-Play convergence, this device also incorporates OAR (Optical Audio Return) and ARC (Audio Return Channel) functions which enable audio from a compatible display to be routed back from the receiver unit to the transmitter. All audio, video, control, and power are transmitted simultaneously over a single CAT6a/7 cable up to 100m.
All of these features are encorporated into an ultra slim casing (less than 18mm thick), providing unrivalled flexibility and ease of installation.
The PU-2010RX Slimline Receiver supports video resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT), LAN, and USB data signals up to 100m. Utilising the latest HDBaseT™ 2.0 technology, this solution provides advanced signal management and dedicated audio pathways to ensure reliable results in the most demanding installation environments. In addition to the full 5-Play convergence, this device also incorporates OAR (Optical Audio Return) and ARC (Audio Return Channel) functions which enable audio from a compatible display to be routed back from the receiver unit to the transmitter. All audio, video, control, and power are transmitted simultaneously over a single CAT6a/7 cable up to 100m.
This system also allows the connection of any USB host, enabling a USB 2.0 connection to 2 x USB ports, giving the PU-2010RX Receiver the ability to act like a USB hub.
All of these features are incorporated into an ultra slim casing (less than 18mm thick), providing unrivalled flexibility and ease of installation.
The PUV-2010TX Slimline Transmitter enables transmission of video resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT), LAN, and USB data signals up to 100m. Utilising the latest HDBaseT™ 2.0 technology, this solution provides advanced signal management and dedicated audio pathways to ensure reliable results in the most demanding installation environments. In addition to the full 5-Play convergence, this device also incorporates OAR (Optical Audio Return) and ARC (Audio Return Channel) functions which enable audio from a compatible display to be routed back from the receiver unit to the transmitter. All audio, video, control, and power are transmitted simultaneously over a single CAT6a/7 cable up to 100m.
This system also allows the connection of any USB host, enabling a USB 2.0 connection to 2 x USB ports, giving the PU-2010RX Receiver the ability to act like a USB hub.
All of these features are incorporated into an ultra slim casing (less than 18mm thick), providing unrivalled flexibility and ease of installation.
The PUV-44XPL-4K22-KIT is a HDMI/HDBaseT LITE Matrix which supports the transmission of video (resolutions up to 4K2K@60Hz, HDCP 2.2) and multi-channel digital audio from 4 HDMI sources to 4 HDBaseT LITE outputs and 2 independent HDMI outputs. HDBaseT outputs allow transmission via a single CAT5e/6/7 cable up to 60m, whilst the independent HDMI outputs support cable lengths of up to 10m. This matrix supports high resolution digital audio formats such as LPCM 7.1CH,Dolby TrueHD, Dolby Digital Plus, Dolby Atmos and DTS-HD Master Audio as well as 3D video content.
This matrix also features audio breakout whereby de-embedded analogue L/R audio outputs are provided for each of the HDBaseT zones (A to D). The Power over HDBaseT (PoH) function provides power to the supplied PUV-1210PL-RX receivers which also support 2-way IR.
Control is via manual selection buttons, IR, RS-232, Telnet or Web GUI. CYP provide control drivers for all the major control systems.
The QU-16E-4K is a versatile 1 to 16 HDMI distribution amplifier. This product is designed to be used in a 19” rack and will distribute uncompressed HDMI signals up to 4K resolutions. Each buffered output can run 1080p/8-bit up to 10 metres and can be cascaded up to two layers.
The XA-2 is an advanced yet compact and convenient pattern generator for testing and troubleshooting HDMI devices. There are 6 resolution settings covering 4K Ultra HD and Full HD resolutions, 4 test patterns, HDCP (1.4, 2.2 and non-HDCP), and 3 audio settings each providing a large array of test signals. With simple to use control via buttons on the front panel, and LED indicators for quick viewing of the current status, this pattern generator is a must have tool for any professional AV integrator.
The XA-4 Advanced HDMI Pattern Generator and Analyser is an integrators tool for producing 4K HDMI signals for verifying and testing wider AV installations. This device has 54 resolutions settings, 47 test patterns, and 6 analysis tests which provide over a thousand different combinations of test scenarios. It supports HDMI data packets, EDID & HDCP analysis, EDID emulation, and allows the user to save 2 custom patterns, along with the ability to generate audio up to 8 channels.
Front panel keys allow fast switching between the various functions and an OLED screen allows for quick viewing of current status information. Control is via front-panel buttons, IR, RS-232, and Telnet allowing users full flexibility in controlling the device.
The XA-HDCP is designed to enable installers to manage HDCP (High-Bandwidth Definition Content Protection) signals. Since the introduction of HDCP2.2, which is not backwards compatible with previous versions, installers face the challenge of managing copy protected content to allow AV signals to be integrated into any AV system. This device converts HDCP2.2 signals to a lower HDCP format enabling AV content to be easily integrated into a system which uses non-HDCP2.2 compliant devices, thus eliminating the need to upgrade all devices in the signal path to be HDCP2.2 compliant.
In addition to converting HDCP signals, the XA-HDCP can also analyse the content bandwidth, HDCP, EDID and Colourspace status of the inputted signal. Further features include the ability to upload EDID settings to a PC application which allows the user to create alternative EDID settings for specific applications. In addition, the XA-HDCP also acts as a HDMI repeater which equalises and recovers TMDS data before re-transmitting, thus ensuring optimal quality regardless of the incoming signal. This equalisation and repeater function enables the HDMI cable distance to be extended 5m from the output at full 4K (6G) resolution.
Control is via the direct selection keys, which allow easy switching between modes, and status LED's provide 'at-a-glance' viewing of the device status.
The AU-11CD-4K22 is an advanced solution for repeating
HDMI with integrated Audio de-embedding, up to 5.1. Connect the AU-11CD-4K22
between your source and display via HDMI, and select the audio format
required. This device supports 4K resolutions, HDMI 2.0 and HDCP 2.2
enabling flexible audio signal management from ultra high definition video
signal paths. The built-in HDMI repeater function allows users to extend the transmission distance of up to 4K2K@60 resolutions a further 5m from the device HDMI output.
Introducing the latest in HDMI cable technology, the CYP HDMI-AOC-20M fiber cable. AOC (Active Optical Cable) allows full 4K UHD resolution support (2160p @ 60hz) to be transmitted over 20 metres. This technology accepts the same electrical inputs as a traditional copper HDMI cable, but uses optical fiber between the connectors. AOC uses electrical to optical conversion over the directional cable connectors to improve distance performance, without sacrificing any signal integrity.
The low profile cast connectors allow for easy installation of the HDMI cable and offer a secure connection to the connected source and display. The cable also offers increased flexibility and durability with its slimline narrow rubber cord. Taking it's power from the 5V pin of the connected source, the HDMI-AOC-20M doesn't require an additional power supply to operate.
***Please note - The HDMI-AOC-20M is a directional cable and needs to be installed following the labelled 'TV' & 'Source' connectors in the correct position***
For installations where space is a premium, such as wall-mounted flat-screen TV's, our latest Ultra Slim HDMI cable range offers the same high speed performance in a far more discreet package. Sporting the same specification, compatibility, and reliability as the High Speed with Ethernet HDMI cable range, Ultra Slim HDMI cable cables are available in 0.5m, 1m, 1.8m, and 3m lengths.
The
CYP HDMP-050M is a
certified Premium HDMI Cable, fully supporting 4k UHD and HDR (High Dynamic Range) AV content.
Offering the ultimate in audio visual signal transmission performance, this new fully-certified
Premium HDMI 0.5 metre long cable features insulated metal plugs and shielded cable, ideal for heard-wearing installations where reliability is essential.
CYP's
Premium HDMI cables are compatible with the full
range of HDMI specifications, including 4k UHD (2160p), FULL HD (1080p)
and deep colour / High Dynamic Range resolutions, 3D, Ethernet (HEC) and
ARC (Audio Return Channel).
Premium Certified HDMI Cable - Anti-Counterfeiting System:

This
new development ensures that the CYP range of professional HDMI cables
has been tested and certified to meet the requirements of Premium HDMI
cable specification.
The anti-counterfeiting label shown on the packaging of a CYP Premium
HDMI Cable has encrypted data in the QR code which will allow you to
quickly verify the authenticity of the cable by using your smart phone
with the free-to-download
HDMI Premium Cable App.
In purchasing this Premium HDMI cable, you can confidently and reliably
enjoy viewing 4k UHD content without interference or signal/connectivity
issues.
Introducing the Brand New MA-421, the perfect AV distribution solution for apartments and small residential installations or even family homes. Offering four HDMI inputs, one HDBaseT output, one HDMI with mirrored HDBaseT output, 20w power amplifier and app control, the MA-421 is our latest AV Distribution Matrix and the first to feature our new CYP Control app.
Included in the system is a compatible PUV-1710LRX-AVLC Receiver, giving you instant flexibility to add a second zone to your system.
Small enough to be placed in an AV cabinet, the MA-421 has been designed for simplicity. Our AVLC (Adaptive Visually Lossless Compression) technology ensures full 4K60 and 4K HDR/Dolby® Vision compatibility out to both HDBaseT outputs, whilst the on-board amplifier adds sound reinforcement by using the ARC audio return pathway to pull the audio signal back from the connected TV to the built-in amplifier and line output, the perfect partner with any soundbar or bookshelf speakers you way wish to use!
Any of the three outputs can be scaled to accommodate a 1080p display that might be included in your home set up! IR control with learning function (RS-232 and WebGUI is also available) enables it to be used with a programmable remote control. To further enhance the user-experience, our new CYP Control app can be programmed with all sources and display device controls, offering a single universal remote control for the whole system.
New CONTROL 4 Simple Device Discovery Protocol (SDDP) support (from v2.16 onward)
This 4K UHD 4 by 4 Matrix provides the ability to connect up to four
4K UHD HDMI sources to up to four 4K UHD HDMI displays and freely
switch between them. This unit comes with full support for 18Gbps
(6G) and resolutions up to and including 4K@60Hz (4:4:4, 8-bit) as
well as support for 48-bit Deep Color, HDR (High Dynamic Range), HD
audio and other features defined by the HDMI 2.0 specification. With
a comprehensive EDID management feature that includes the ability
to select between built in default EDID, EDID copied from connected
sink devices, as well as a configurable EDID, this matrix can solve
many inter-connectivity problems. This unit also features four USB ports
which supply up to 5V/1A power for use with connected optical fiber
or AOC fiber cable extenders or CAT5 balun extenders.
The built in OSD allows the user to display text on screen.
Each output is capable of displaying up to 2 lines of text on top of the video source
in the color of your choice. The unit can be controlled using the
OSD as well as RS-232, telnet, WebGUI, and IR remote control.
The
PUV-1082-PRO is designed for the Professional AV Installer based on the hugely successful PUV-1082-4K22. The Matrix supports the transmission of video
(resolutions up to 4K UHD 10/12-bit HDR & Dolby Vision, HDCP 2.2, HDMI2.0) and multi-channel
digital audio from 10 HDMI sources to 8 HDBaseT™ outputs and 2
independent HDMI2.0 outputs (18Gbps). Despite the 10.2Gbps limitation of HDBaseT technology, this groundbreaking product enables data rates of up to
18Gbps to be transmitted using AVLC (Adaptive Visually Lossless
Compression) Technology. The transmitter enables 4KUHD sources up-to and
including 4K@60Hz (4:4:4 8-bit) as well as 10/12 bit sources with HDR
(Including Dolby Vision) to be extended to a compatible receiver. The
result is a perfect 4K 6G visually lossless image delivered to the
display screen.
The PUV-1082-PRO supports independent video output scaling on all of the HDBaseT and HDMI outputs. This is particularly useful when transmitting a 4KHDR image from the matrix to a standard 1080p HD display within an AV setup.
This matrix supports high resolution
digital audio formats such as LPCM 7.1CH, Dolby TrueHD, Dolby Digital
Plus, Dolby Atmos and DTS-HD Master Audio as well as 3D video content.
The PUV-1082-PRO incorporates an independent audio matrix with 14 audio outputs and 10 audio inputs. These
outputs and inputs can also be used for de-embedding HDMI audio to the
audio outputs and embedding audio to the HDBaseT and HDMI outputs. The
audio CAT connections, along with compatible bi-directional audio
modules (PU-305BD-RX & PU-305BDA-RX) allow integration with remote
sources and remote audio zones. In addition, volume, mute, treble, bass and audio lip-sync correction control
are available on all direct audio outputs. Optical Audio Return (OAR)
Technology allows the optical input on the PUV-1830RX-AVLC receiver to be
routed back to the audio matrix.
LAN
connectivity provides a 100BaseT network for smart TVs or games
consoles in every zone. The matrix has a built-in pattern generator
which can be used to verify the video signal on any of its 10 output
ports. The Power over HDBaseT (PoH) function provides power to
compatible receivers.
Control
is via manual selection buttons, IR, RS-232, Telnet or Web GUI. CYP
provide control drivers for all the major control systems. This unit
also supports RS232 pass-through to the receivers. The PUV-1082-PRO is
designed to be used with PUV-1830RX-AVLC or PUV-1810RX-AVLC receivers that utilise the PoH and LAN capabilities of the matrix.
The new PUV-1710LRX-AVLC Receiver enables video resolutions up
to 4K UHD including 10/12-bit HDR & Dolby Vision, to be received along with HD audio, 2-Way IR, RS-232, PoH (Power over
HDBaseT™) signals from a distance of 70m. This
solution provides advanced signal management ensuring reliable results
in the most demanding installation environments. All audio, video,
control, and power are received simultaneously over a single CAT6a/7
cable up to 70m.
Despite the 10.2Gbps limitation of HDBaseT technology, this groundbreaking product enables data rates of up to
18Gbps to be received using AVLC (Adaptive Visually Lossless
Compression) Technology. The receiver enables 4KUHD sources up-to and
including 4K@60Hz (4:4:4 8-bit) as well as 10/12 bit sources with HDR
(Including Dolby® Vision) to be received over distance from a compatible transmitter. The
result is a perfect 6G 4K visually lossless image delivered to the display
screen.
The new PUV-1710LTX-AVLC Transmitter enables video resolutions up
to 4K UHD including 10/12-bit HDR & Dolby Vision, to be transmitted along with HD audio, 2-Way IR, RS-232, PoH (Power over
HDBaseT) signals up to a distance of 70m. This
solution provides advanced signal management ensuring reliable results
in the most demanding installation environments. All audio, video,
control, and power are transmitted simultaneously over a single CAT6a/7
cable up to 70m.
Despite the 10.2Gbps limitation of HDBaseT technology, this groundbreaking product enables data rates of up to 18Gbps to be transmitted using AVLC (Adaptive Visually Lossless Compression) Technology. The transmitter enables 4KUHD sources up-to and including 4K@60Hz (4:4:4 8-bit) as well as 10/12 bit sources with HDR (Including Dolby Vision) to be extended to a compatible receiver. The result is a perfect 4K 6G visually lossless image delivered to the display screen.
The AU-11CA-4K22 Audio Embedder enables you to insert
an external audio signal into any HDMI source signal. This device allows you to
insert analogue or digital stereo and multi-channel digital surround sound
signals (via Optical) to give users the flexibility to manage their audio signals within a wider AV installation. In addition to it's primary function as an audio embedder, AU-11CA-4K22 also acts as a HDMI repeater by boosting the HDMI signal enabling up to 10m HDMI cables to be run
from the HDMI output . This device supports HDMI 2.0, HDCP 2.2 and 4K resolutions
enabling flexible audio signal management into 4K ultra high definition video
signal paths.
The AU-11SA-4K22 advanced digital audio decoder is designed to de-embed 2-channel or multi-channel audio from the connected HDMI input and breakout this audio to provide
7.1 analogue audio connections, plus a 5.1 optical audio output and a HDMI bypass
output. This device supports bypass of high resolution digital audio formats including LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus, Dolby Atmos and DTS-HD Master Audio, and supports audio sampling rates up to 192kHz.
In addition, the AU-11SA-4K22 supports 4K video resolutions, HDMI 2.0, and HDCP 2.2 ensuring stunning results and maximum compatibility for any AV system.
The AU-D250-4K22 is designed to integrate and convert both analogue and digital audio signals into any AV system. This device has an in-built sample rate converter which can upscale audio signals between 44.1kHz to 192kHz (24-bit). With 4K resolution support, HDMI2.0 and HDCP2.2 compliance, the AU-D250-4K22 also enables switching of up to 4 HDMI sources to a single HDMI output, and allows the user to embed or de-embed audio within the HDMI signal path. The AU-D250 not only provides a truly enhanced listening experience, but also the flexibility to manage all audio signals in your AV system.
The DS-MSC14-4K22 has been designed to provide an easier and
more convenient way to create and deploy video wall
installations.
Delivering complete scalability, and capable of driving up to four 1080p
displays, all from a single 4K UHD source. For larger installations multiple
DS-MSC14-4K22 units can be combined to create up an 8x8 configuration.
Each of the 4 outputs support 1080p@60Hz to generate a true 4K video
wall. Built-in advanced EDID management, user configurations and advanced HDCP
processing allows the DS-MSC14-4K22 to suit almost any installation
scenario. Control is via RS-232, Telnet IP and PC application which allow
full control of the DS-MSC14-4K22 from adjusting the bezel correction to
pre-set video wall layouts.
This 4-Way HDMI Switcher is designed to enable the user to switch between any of the four connected HDMI sources to send video and audio to a single HDMI display. This switcher fully supports 4K resolutions and is HDMI2.0 and HDCP 2.2 compliant, ensuring maximum compatibility with the latest 4K UHD sources and displays. The EL-41HP-4K22 supports all the latest features of the HDMI 2.0 specification such as 4K UHD resolutions (4K2K@60Hz - YUV4:4:4),HDR (High Dynamic Range), 'Deep Color', and High Definition audio. In addition, this switcher also features an Auto-Switching function which detects the last active input and switches to this input automatically for display. The management of source/sink configurations can be easily controlled via the on-board WebGUI LAN control, IR remote control and RS-232.
This 4-Way HDMI Switcher is designed to enable the user to switch between any of the four connected HDMI sources to send video and audio to a single HDMI display. This switcher fully supports 4K resolutions and is HDMI2.0 and HDCP 2.2 compliant, ensuring maximum compatibility with the latest 4K UHD sources and displays. The EL-41S-4K22 supports all the latest features of the HDMI 2.0 specification such as 4K UHD resolutions (4K2K@60Hz - YUV4:4:4),HDR (High Dynamic Range), 'Deep Color', and High Definition audio. In addition, this switcher also features an Auto-Switching function which detects the last active input and switches to this input automatically for display. Control is via IR remote control and RS-232.
The
EL-42M-PIP is an advanced Picture-in-Picture (PIP) Multi-view Matrix designed
for use across Broadcast, Live events, Military and Medical applications.
Our most
advanced PIP device features support for 4K HDR sources. The EL-42M-PIP enables
up to 4 sources to be viewed in multi-view mode via the two mirrored HDMI outputs in your chosen
configuration. Simply switch between pre-sets or change the configuration live,
via the onboard web GUI.
Additionally,
the EL-42M-PIP can be switched to Matrix mode allowing seamless switching
between source and screen for low latency applications. Control is handled by
the front panel buttons, OSD, RS232 and IP Telnet as well as the webGUI.
The EL-6010-4K22 is a multi-format scaler with HDMI, VGA, and DisplayPort inputs scaling to the HDMI output. Ideal for boardroom or classroom applications, this device is designed to enable an installer to scale the input from the connected source device to a HDMI resolution suitable for the connected HDMI display. The maximum output resolution supported is 4K@60Hz (YUV 4:4:4).
This unit also features a selection of adjustment options you are likely to need when accommodating different sources including a wide array of aspect ratio settings as well as contrast, brightness, saturation, hue, and sharpness settings directly on the device. In addition, the EL-6010-4K22 has an analogue speaker output for ease of integration when employed in conference centres, classrooms and public venues. The auto source detection feature is designed to switch to the most recently connected source automatically and to switch to another live input if the current one becomes disconnected. This unit is controllable via front panel controls (with OSD), WebGUI, IR remote, telnet and RS-232. These comprehensive control interfaces make operation easy and intuitive.
The EL-8300VA is an advanced multi-format presentation
switch with integrated scaling across the HDMI, USB-C, Displayport and VGA
inputs, plus HDMI and HDBaseT outputs. The EL-8300VA features HDBaseT extension
for video up to 4K/60 (4:2:0), plus embedded audio, control and Ethernet over
distances of up to 100m. The HDMI, USB-C and DisplayPort inputs support video up
to 4K/60 (4:4:4, 8-bit) while the VGA input supports resolutions up
to WUXGA. The EL-8300VA is HDCP 2.2 compliant
and features 4K/60 4:4:4 upscaling and downscaling across all the inputs.
The EL-8300VA includes multiple analogue stereo audio inputs and microphone input,
along with amplified and balanced line-level analogue stereo outputs, providing
a range of audio routing and mixing functionality. The built-in audio
mixer function allows the user to mix audio from any LPCM 2.0 source with
the microphone input for presentation or lecture usage. The ability to
switch back and forth between mixed and non-mixed audio provides
additional flexibility to the presentation experience.
Trigger inputs allow the easy addition of a remote control keypad
(CR-TG1), or third party voltage trigger products, which can be installed
within a podium or table in a conference room or classroom. This interface
enables the user to activate functions with the simple press of a button.
Comprehensive control options are provided via the front panel buttons (various
button locking features available), On-Screen Display (OSD), WebGUI, IP Telnet,
Voltage Trigger, and RS-232.
The EL-8500VA is a multi-format scaling HDMI, USB Type C,
HDBaseT, and VGA input presentation switch, which allows the user to output at a
scaled resolution of the user’s choosing over the mirrored HDMI and
HDBaseT outputs. The HDMI and USB-C ports support resolutions up to
4K@60 (4:4:4, 8-bit) while the HDBaseT output supports automatic
down-conversion of 4K60(4:4:4) sources to 4K60(4:2:0). The VGA inputs
support resolutions up to WUXGA. The HDBaseT output provides a great
solution to extend your audio and video up to 70 meters (at 4K) over a
single run of Cat.5e/6/7 cable as well as providing 48V PoH power to
compatible HDBaseT Receivers.
This
unit also includes multiple analogue stereo audio inputs and a microphone
input along with an amplified analogue stereo output to provide a range
of audio routing and mixing flexibility. The built-in audio mixer
function allows the user to mix audio from any analogue input with the
microphone input for presentation or lecture theatre usage. The ability to
switch back and forth between mixed and non-mixed audio
simplifies the presentation experience.
A
trigger input interface is also provided to allow the easy addition of a
remote control keypad, or other trigger-supporting products, which can
be installed within a podium or within a table in a conference room or
classroom. This interface can allow the user to activate functions with
the simple press of a button. Standard control is available via front
panel buttons with an On-Screen Display (OSD), WebGUI,
Telnet and RS-232.
The EL-XTREAM-PIP is an HDMI multi-viewer with integrated
USB video capture functionality enabling live recording or streaming of the
connected input device. The multi-view and video capture output can be configured
in real-time making this the perfect remote learning or video conferencing
solution.
The 4 HDMI inputs can be displayed individually, full screen
or within a multi-view arrangement such as Picture-in-Picture or Picture-on-Picture.
Onboard video scaling allows the inputs signal to be manipulated to suit the
streaming or distribution requirements. Dual HDMI outputs provide flexible monitoring
or local distribution of the video signal.
The EL-XTREAM-PIP supports streaming via Common Video Capture,
Social Media and the major streaming software. Including support for the OBS(Open
Broadcaster Software). OBS Can be run on Windows, Mac OS and Linux. Availability
and access to the controllable features of the unit depend on the capture software
used.
Offering the ultimate in HD performance at a real world price, the High Speed with Ethernet HDMI cable range features superior 99.999% oxygen free quality copper and durable moulded HDMI plugs ideal for hard-wearing installations where reliability is essential. Compatible with the full range of HDMI v2.0 specifications, including 4K, full 1080p and deep colour resolutions, 3D and Ethernet and Audio Return Channel (ARC), the High Speed with Ethernet HDMI cable range is available in lengths of 1m, 2m and 3m. For longer distances, please see our Premium range (HDMP)
Continuing on from the outstanding popularity of our innovative Flexi-Form HDMI cable range, installers will be pleased to hear that this range has now been further enhanced to incorporate the latest HDMI v2.0 specifications enabling support for the latest 4K resolutions. Our new Flexi-Form HDMI cable range features an innovative construction that allows them to be manipulated into any desired shape that will then be retained for the duration of the install. Flexi-Form HDMI cables are manufactured from 99.999% oxygen free copper and are compatible with 3D, full 1080P and deep colour resolutions. Ideal for the custom installer looking for a neat solution when cable dressing rack-mounted HDMI devices, they are available in short lengths of 0.3m.
The
CYP HDMP-100M is a
certified Premium HDMI Cable, fully supporting 4k UHD and HDR (High Dynamic Range) AV content.
Offering the ultimate in audio visual signal transmission performance, this new fully-certified
Premium HDMI 1 metre long cable features insulated metal plugs and shielded cable, ideal for heard-wearing installations where reliability is essential.
CYP's
Premium HDMI cables are compatible with the full
range of HDMI specifications, including 4k UHD (2160p), FULL HD (1080p)
and deep colour / High Dynamic Range resolutions, 3D, Ethernet (HEC) and
ARC (Audio Return Channel).
Premium Certified HDMI Cable - Anti-Counterfeiting System:

This
new development ensures that the CYP range of professional HDMI cables
has been tested and certified to meet the requirements of Premium HDMI
cable specification.
The anti-counterfeiting label shown on the packaging of a CYP Premium
HDMI Cable has encrypted data in the QR code which will allow you to
quickly verify the authenticity of the cable by using your smart phone
with the free-to-download
HDMI Premium Cable App.
In purchasing this Premium HDMI cable, you can confidently and reliably
enjoy viewing 4k UHD content without interference or signal/connectivity
issues.
The
CYP HDMP-200M is a
certified Premium HDMI Cable, fully supporting 4k UHD and HDR (High Dynamic Range) AV content.
Offering the ultimate in audio visual signal transmission performance, this new fully-certified
Premium HDMI 2 metre long cable features insulated metal plugs and shielded cable, ideal for heard-wearing installations where reliability is essential.
CYP's
Premium HDMI cables are compatible with the full
range of HDMI specifications, including 4k UHD (2160p), FULL HD (1080p)
and deep colour / High Dynamic Range resolutions, 3D, Ethernet (HEC) and
ARC (Audio Return Channel).
Premium Certified HDMI Cable - Anti-Counterfeiting System:

This
new development ensures that the CYP range of professional HDMI cables
has been tested and certified to meet the requirements of Premium HDMI
cable specification.
The anti-counterfeiting label shown on the packaging of a CYP Premium
HDMI Cable has encrypted data in the QR code which will allow you to
quickly verify the authenticity of the cable by using your smart phone
with the free-to-download
HDMI Premium Cable App.
In purchasing this Premium HDMI cable, you can confidently and reliably
enjoy viewing 4k UHD content without interference or signal/connectivity
issues.
The
CYP HDMP-300M is a
certified Premium HDMI Cable, fully supporting 4k UHD and HDR (High Dynamic Range) AV content.
Offering the ultimate in audio visual signal transmission performance, this new fully-certified
Premium HDMI 3 metre long cable features insulated metal plugs and shielded cable, ideal for heard-wearing installations where reliability is essential.
CYP's
Premium HDMI cables are compatible with the full
range of HDMI specifications, including 4k UHD (2160p), FULL HD (1080p)
and deep colour / High Dynamic Range resolutions, 3D, Ethernet (HEC) and
ARC (Audio Return Channel).
Premium Certified HDMI Cable - Anti-Counterfeiting System:

This
new development ensures that the CYP range of professional HDMI cables
has been tested and certified to meet the requirements of Premium HDMI
cable specification.
The anti-counterfeiting label shown on the packaging of a CYP Premium
HDMI Cable has encrypted data in the QR code which will allow you to
quickly verify the authenticity of the cable by using your smart phone
with the free-to-download
HDMI Premium Cable App.
In purchasing this Premium HDMI cable, you can confidently and reliably
enjoy viewing 4k UHD content without interference or signal/connectivity
issues.
The
CYP HDMP-500M is a
certified Premium HDMI Cable, fully supporting 4k UHD and HDR (High Dynamic Range) AV content.
Offering the ultimate in audio visual signal transmission performance, this new fully-certified
Premium HDMI 5 metre long cable features insulated metal plugs and shielded cable, ideal for heard-wearing installations where reliability is essential.
CYP's
Premium HDMI cables are compatible with the full
range of HDMI specifications, including 4k UHD (2160p), FULL HD (1080p)
and deep colour / High Dynamic Range resolutions, 3D, Ethernet (HEC) and
ARC (Audio Return Channel).
Premium Certified HDMI Cable - Anti-Counterfeiting System:

This
new development ensures that the CYP range of professional HDMI cables
has been tested and certified to meet the requirements of Premium HDMI
cable specification.
The anti-counterfeiting label shown on the packaging of a CYP Premium
HDMI Cable has encrypted data in the QR code which will allow you to
quickly verify the authenticity of the cable by using your smart phone
with the free-to-download
HDMI Premium Cable App.
In purchasing this Premium HDMI cable, you can confidently and reliably
enjoy viewing 4k UHD content without interference or signal/connectivity
issues.
The
CYP HDMP-600M is a
certified Premium HDMI Cable, fully supporting 4k UHD and HDR (High Dynamic Range) AV content.
Offering the ultimate in audio visual signal transmission performance, this new fully-certified
Premium HDMI 6 metre long cable features insulated metal plugs and shielded cable, ideal for heard-wearing installations where reliability is essential.
CYP's
Premium HDMI cables are compatible with the full range of HDMI specifications, including 4k UHD (2160p), FULL HD (1080p) and deep colour / High Dynamic Range resolutions, 3D, Ethernet (HEC) and ARC (Audio Return Channel).
Premium Certified HDMI Cable - Anti-Counterfeiting System:
This new development ensures that the CYP range of professional HDMI cables has been tested and certified to meet the requirements of Premium HDMI cable specification.
The anti-counterfeiting label shown on the packaging of a CYP Premium HDMI Cable has encrypted data in the QR code which will allow you to quickly verify the authenticity of the cable by using your smart phone with the free-to-download
HDMI Premium Cable App.
In purchasing this Premium HDMI cable, you can confidently and reliably enjoy viewing 4k UHD content without interference or signal/connectivity issues.
The IP-7000 series allows installers to configure a unique signal distribution system via a dedicated IT Network Infrastructure. You are in control when deciding how many inputs and end-points you require from the system; whether it be one transmitter to many receivers or many to many, your possibilities are almost endless. Simplicity is at the core of the IP-7000 as both the transmitter and receiver support PoE.
This wall plate Transmitter adds flexibilty to the IP-7000 series by allowing a clean and simple wall mountable option.
The video and audio can be transmitted via an IP network for distances up to 100m through a single network switch. The transmission distance can be further extended up to 100m between network switches and supports Gigabit networks.
This system also features bi-directional IR pass-through, analogue line level in/out, and microphone input, providing the user with variety of audio options. The USB function allows the system to act like USB hub which, when combined with the VGA input/Output feature, allows the system to be used as a KVM switch. Adding extra devices allows the user to cascade the system enabling them to extend the transmission distance without signal loss or introducing delay.
Control is via Telnet, IR Remote, WebGUI and RS-232 commands with On-screen Display (OSD) feedback messaging.
The LE-44M70-KIT is a HDMI/HDBaseT LITE Matrix which supports the
transmission of video (resolutions up to 4K 4:4:4@60Hz, HDCP 2.2) and
multi-channel digital audio from 4 HDMI sources to 4 HDBaseT LITE outputs and 4
mirrored HDMI outputs. HDBaseT outputs allow transmission via a single
CAT5e/6/7 cable up to 70m, whilst the mirrored HDMI outputs support cable
lengths of up to 10m. This matrix supports high resolution digital audio
formats such as LPCM 7.1CH,Dolby TrueHD, Dolby Digital Plus, Dolby Atmos and
DTS-HD Master Audio as well as 3D video content.
This
matrix also features audio embedding via the 3.5mm analogue audio inputs, and
audio de-embedding for each zone via the 3.5mm and digital coaxial outputs.
Control
is via manual selection buttons, IR, RS-232, Telnet or Web GUI.
The
LE-88M70 8x8 HDMI/HDBaseT Lite Matrix supports the transmission of video
signals (resolutions up to 4K 4:4:4@60Hz, HDCP 2.2), multi-channel digital audio from 8 HDMI sources to 8 HDBaseT
LITE outputs via single CAT5e/6/7 cable up to 70m, and 8 mirrored HDMI
zone outputs. The matrix is compatible with high resolution digital audio
formats such as LPCM 7.1CH,Dolby TrueHD, Dolby Digital Plus and DTS-HD Master
Audio as well as 3D content that can be displayed when connecting a 3D TV
and 3D source.
Additional
audio functionality includes audio embedding and de-embedding for each source
and zone respectively. This matrix
features control via manual selection buttons, IR, RS-232, Telnet or Web
GUI.
The LE-88M70 is
designed to be used with the LE-EX33-RX receivers.
The LE-EX33-Kit, an HDBaseT lite Extender supporting HDCP1.4 & 2.2, POC, 4K, RS232, Bi-directional IR up to a maximum distance of 70m 1080p and 40m 4K
The LE-EX53-RX HDBaseT receiver allows HDMI signals to be received over a single CAT5e/6/7 cable. This receiver features support for 2-way IR control, RS232 and Power over Cable (PoC) functionality over the same piece of CAT cable. These combined HDMI and control signals can be transmitted up to lengths of 70m.
Compatible Receiver for the LE-14H70 and LE-88M70 HDBaseT products.
This 4x2 HDMI Matrix Switcher is designed to enable the user to switch between any of the four connected HDMI sources to send video and audio to either of the two connected HDMI displays. This matrix switcher fully supports 4K resolutions and is HDMI2.0 and HDCP 2.2 compliant, ensuring maximum compatibility with the latest 4K UHD sources and displays. The unit supports all the latest features of the HDMI2.0 specification such as 4K UHD resolutions (4K2K@60Hz - YUV4:4:4),HDR (High Dynamic Range), 'Deep Color', and High Definition audio. Control is via manual selection buttons, IR, RS-232, Telnet or Web GUI.
The OR-42CD-4K22 provides the ability to connect up to
four 4K HDR HDMI sources to up to two 4K HDR HDMI displays and freely switch
between them. This matrix fully support for 4K@60Hz (4:4:4, 8- bit)
signals as well as support for 16-bit Deep Color, HDR (High Dynamic Range), 3D
content, HD audio and other features defined by the HDMI 2.0 specification.
A
high-quality local analog stereo audio breakout from a selected HDMI output is
also available. Each input’s EDID can be independently set to use either an
internal (1080p@60Hz) or external (sink-copied) EDID. This unit also provides
per-output auto source switching as well as connected display power control
using CEC or RS-232 commands. Control of the unit is provided via front panel
buttons, RS-232, and IR remote
The OR-42SA-4K22 HDMI
Switcher is a powerful scaling solution designed for live events, lecture
theatres, broadcast applications and much more.
The advanced scaling engine allows live adjustment of several picture
elements including contrast, brightness, hue, noise reduction and RGB levels
plus adaptive de-interlacing and frame rate conversion.
Integrated auto-switching, with signal dropout detection, reverts to the
last active connected source in the event of signal loss. Ideal for conference
centres, live events and mission-critical applications. Control is handled via
front panel, OSD, RS232 and IR
This 4x4 HDMI Matrix Switcher is designed to enable the user to switch between any of the four connected HDMI sources to send video and audio to any of the four connected HDMI display. This matrix switcher fully supports 4K resolutions and is HDMI2.0 and HDCP 2.2 compliant, ensuring maximum compatibility with the latest 4K UHD sources and displays. The unit supports all the latest features of the HDMI2.0 specification such as 4K UHD resolutions (4K2K@60Hz - YUV4:4:4),HDR (High Dynamic Range), 'Deep Color', and High Definition audio. Control is via manual selection buttons, IR, RS-232, Telnet or Web GUI.
The OR-88U-4K22 8x8 Matrix provides the ability to
connect up to eight 4K UHD HDMI sources to up to eight 4K UHD HDMI displays and
freely switch between them. This unit comes with full support for 18Gbps
(6G) resolutions up to, and including 4K@60Hz (4:4:4, 8-bit) as well as
support for 16-bit Deep Color up to 1080p@60Hz, HDR (High Dynamic Range), HD
audio and other features defined by the HDMI 2.0a specification. With a
comprehensive EDID management feature that includes the ability to select
between built in default EDID, copied EDID from connected sink devices, as well
as a configurable EDID, this matrix can solve many inter-connectivity problems.
This unit also features eight USB ports
which supply up to 5V/1A power for use with connected AOC (Active Optical
Cable) fiber cable extenders. By using these specialized cables your HDMI
content can be extended much further than would be possible with normal HDMI
cables. The built-in OSD has the ability to display user defined text, enabling each output to display 2 lines of custom text on
top of the video source in the color of your choice. This unit provides an
intuitive set of front panel controls with an LCD, RS-232, Telnet,
WebGUI, and IR remote control options.
The OR-HD62CD-4K22 is an advanced 4K HDR HDMI matrix
switcher designed for both commercial and residential applications.
The 6 x 2 HDMI matrix switch enables 4K HDR (6G) HDCP
2.2 HDMI
signals to be routed from any of the six HDMI inputs to either of the
two independent HDMI outputs. Further
features include fast switching technology, on-board EDID management
tool (via
on screen display) and optical audio de-embedding for added flexibility
of installation.
Control is via front panel buttons, IR remote control,
RS232, Telnet or IP control for easy integration into control systems.
The PRO-F12TX from CYP is a HDMI over Fiber Transmitter designed to extend your 4K UHD HDMI signal using multi-mode fiber optic cable.
The HDMI input and output of this unit supports resolutions up to 4K@60Hz (4:4:4, 8-bit), 10/12-bit HDR, 16-bit Deep Color up to 1080p@60Hz, as well as HD audio formats and features defined by the HDMI 2.0 specification. The HDMI and Fiber outputs of this unit are mirrored, however HDMI sources with bandwidth higher than 10.2Gbps are automatically chroma and/or bit-depth subsampled for transmission over the fiber output. Six pre-defined internal EDIDs, two external EDID selections and a User uploaded EDID are available for EDID management. The unit provides front panel control as well as RS-232, Telnet and WebGUI control options
Using fiber optical cable provides many advantages over traditional copper-based extension methods, including RF immunity and electro-magnetic interference, thinner and lighter cables, and greater extension distances (up to 300 meters per jump). Multiple fiber Transceiver (PRO-F32M) units can be placed between the Transmitter and Receiver to increase the transmission distance up to 300m per transceiver. Multiple transceivers also increase installation flexibility and create a matrix system. The unit can be used as a simple 'point to point' fiber solution when paired with the PRO-F21RX.
The PRO-F21RX from CYP is a HDMI over Fiber Receiver designed to extend your 4K UHD HDMI signal using multi-mode fiber optic cable .
The HDMI input and output of this unit supports resolutions up to 4K@60Hz (4:4:4, 8-bit), 10/12-bit HDR, 16-bit Deep Color up to 1080p@60Hz, as well as HD audio formats and features defined by the HDMI 2.0 specification. The HDMI and Fiber outputs of this unit are mirrored, however HDMI sources with bandwidth higher than 10.2Gbps are automatically chroma and/or bit-depth subsampled for transmission over the fiber output. Six pre-defined internal EDIDs, two external EDID selections and a User uploaded EDID are available for EDID management. The unit provides front panel control as well as RS-232, Telnet and WebGUI control options.
Using fiber optical cable provides many advantages over traditional copper-based extension methods, including RF immunity and electro-magnetic interference, thinner and lighter cables, and greater extension distances (up to 300 meters per jump). Multiple fiber Transceiver (PRO-F32M) units can be placed between the Transmitter and Receiver to increase the transmission distance up to 300m per transceiver. Multiple transceivers also increase installation flexibility and create a matrix system. The unit can be used as a simple 'point to point' fiber solution when paired with the PRO-F12TX.
This combined Transceiver/Matrix enables the routing of up to three HDMI input signals (2 x 18Gbps HDMI inputs and 1 x 10.2Gbps optical fiber input) to any of the two outputs (1 x 18Gbps HDMI and 1 x 10.2Gbps optical fiber). The optical fiber input and output both support transmission distances up to 300 meters and use paired LC connectors. Simple integration and compatibility is achieved when the units are paired with the PRO-F12TX and PRO-F21RX.
The PRO-F32M supports resolutions up to 4K@60Hz (4:4:4, 8-bit), 16-bit Deep Color up to 1080p@60Hz, HDR (High Dynamic Range), HD audio formats and other features defined by the HDMI 2.0 specification. HDMI sources with bandwidth higher than 10.2Gbps are automatically chroma and/or bit-depth subsampled for transmission over the fiber output. Six pre-defined internal EDIDs and two external EDID selections are available for EDID management. The unit provides intuitive front panel controls as well as RS-232, Telnet, WebGUI and IR remote control options.
The PU-515PL-RX allows uncompressed HDMI signals to be transmitted over a Single CAT5e/6/7 cable. This solution has the added features of RS-232, 2-way IR control, and Power over Cable (PoC) functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 60 metres.
The PU-8H8HBTE-4K22 8 by 8 HDMI Matrix over CAT5e/6/7 supports the transmission of video (resolutions up to 4K2K Full HD, HDCP 2.2) and multi-channel digital audio from 8 HDMI sources to 8 HDBaseT outputs via single CAT5e/6/7 cables up to 100m. It supports high resolution digital audio formats such as LPCM 7.1CH,Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio as well as 3D content that can be displayed when connecting a 3D TV and 3D source. This matrix features control via manual selection buttons, IR, RS-232, Telnet or Web GUI. CYP provide control drivers for all the major control systems. This unit also supports RS232 pass-through to the receivers. The PU-8H8HBTE-4K22 is designed to be used with any of the HDBaseT receivers that can utilise the PoC and LAN capabilities of the matrix. The LAN serving capabilities of the matrix provide network connections in every zone.
The PUV-1082-4K22 HDMI/HDBaseT Matrix supports the transmission of video (resolutions up to 4K2K@60Hz, HDCP 2.2, HDMI2.0) and multi-channel digital audio from 10 HDMI sources to 8 HDBaseT outputs and 2 independent HDMI2.0 outputs. HDBaseT outputs allow transmission via a single CAT5e/6/7 cable up to 100m, whilst the independent HDMI outputs support cable lengths of up to 10m. This matrix supports high resolution digital audio formats such as LPCM 7.1CH,Dolby TrueHD, Dolby Digital Plus, Dolby Atmos and DTS-HD Master Audio as well as 3D video content.
This matrix incorporates an independent audio matrix with 14 audio outputs and 10 audio inputs. These outputs and inputs can also be used for de-embedding HDMI audio to the audio outputs and embedding audio to the HDBaseT and HDMI outputs. The audio CAT connections, along with compatible bi-directional audio modules (PU-305BD-RX & PU-305BDA-RX) allow integration with remote sources and remote audio zones. In addition, volume, mute, treble, bass and audio lip-sink correction control are available on all direct audio outputs. Optical Audio Return (OAR) Technology allows the optical input on the PUV-1530RX receiver to be routed back to the audio matrix.
LAN connectivity provides a 100BaseT network for smart TVs or games consoles in every zone. The matrix has a built-in pattern generator which can be used to verify the video signal on any of its 10 output ports. The Power over HDBaseT (PoH) function provides power to compatible receivers.
Control is via manual selection buttons, IR, RS-232, Telnet or Web GUI. CYP provide control drivers for all the major control systems. The PUV-1082-4K22 is designed to be used with PUV-1530RX or PUV-1510RX receivers that can utilise the PoH and LAN capabilities of the matrix.
The PU-1210PL-RX Receiver will accept transmitted video resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT) up to 60m. This solution provides advanced signal management ensuring reliable results in the most demanding installation environments. All audio, video, control, and power are received simultaneously over a single CAT6a/7 cable up to 60m.
The PU-1210PL-TX Transmitter enables transmission of video resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT) up to 60m. This solution provides advanced signal management ensuring reliable results in the most demanding installation environments. All audio, video, control, and power are transmitted simultaneously over a single CAT6a/7 cable up to 60m.
The PU-1230PL-RX Receiver will accept transmitted video resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT), and OAR (Optical Audio Return) up to 60m. This solution provides advanced signal management ensuring reliable results in the most demanding installation environments. All audio, video, control, and power are received simultaneously over a single CAT6a/7 cable up to 60m.
The PU-1230PL-TX Transmitter enables transmission of video resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT), and OAR (Optical Audio Return) up to 60m. This solution provides advanced signal management ensuring reliable results in the most demanding installation environments. All audio, video, control, and power are transmitted simultaneously over a single CAT6a/7 cable up to 60m.
The PUV-1250PL-TX is a Multi-Format HDBaseT™ Extender designed to
provide a flexible solution for educational and corporate environments.
Featuring HDMI, USB-C, DisplayPort & VGA inputs with support for 4K (4K@24-30Hz 4:4:4, 4K@60Hz 4:2:0), the PUV-1250PL-TX offers a wide variety of connectivity
and switching options for any presentation space. 4K signals beyond HDBaseT bandwidth are automatically converted to ensure a signal is always received at the RX.
Auto-switching is operational across all digital video inputs ensuring
the active source will always be displayed. EDID & HDCP settings can be
adjusted from the WebGUI plus signal event automation allows CEC commands to be
sent to turn on connected screens once an active source is detected. The USB-C
input provides power (up to 60W) to any connected device, and the HDBaseT
output provides PoH (Power over HDBaseT) to connected compatible receivers such
as the PUV-1210PL-RX.
Control is provided via the front panel, WebGUI, IP Telnet and RS232.
The PUV-1510RXWP Receiver will accept transmitted video resolutions up
to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over
HDBaseT), and LAN signals up to 100m. This solution provides advanced
signal management ensuring reliable results in the most demanding
installation environments. All audio, video, control, and power are
received simultaneously over a single CAT6a/7 cable up to 100m. Wall plate version designed for a UK 2-gang back box.
The PUV-1510TXWP Transmitter enables transmission of video resolutions
up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over
HDBaseT), and LAN signals up to 100m. This solution provides advanced
signal management ensuring reliable results in the most demanding
installation environments. All audio, video, control, and power are
transmitted simultaneously over a single CAT6a/7 cable up to 100m. Wall plate version designed for a UK 2-gang back box.
The PUV-1540S-RX is designed to scale and
convert HDBaseT video and audio outputting via a local HDMI output. The HDBaseT input
supports resolutions up to 4K@60Hz (4:2:0, 8-bit). The scaled HDMI output
supports resolutions from 640×480@60Hz up to 4K@60Hz and provides the ability
to adjust the image with a number of fine tuning options including: contrast,
brightness, hue, saturation, sharpness, noise reduction, and RGB levels.
Furthermore, this unit supports passing 7.1
channel LPCM digital audio as well as advanced Bitstream and HD Bitstream audio
formats. Analogue stereo audio breakout is also available (LPCM 2.0 sources
only). Shortcut keys are provided to quickly change the output resolution to
1080p or XGA when needed for quick connection to a display or for
troubleshooting purposes.
Additionally, the unit may be powered
locally or via 48V PoH (Power over HDBaseT) from a compatible HDBaseT
Transmitter (PUV-1500 Series), which allows for greater flexibility in installations. The unit
can be controlled via front panel buttons with a comprehensive OSD.
The PUV-1550SRX Receiver supports video resolutions up to 4K UHD along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT), LAN and Optical Audio Return (OAR) over a single Cat5e/6/7 cable up to 100m. While the HDBaseT input is limited
to a maximum of 4K@60Hz (4:2:0), this unit can automatically convert or scale
the input to display 4K@60Hz (4:4:4) at the receiving end depending on the detected capability of the
connected display panel. Conversely the user can downscale 4K UHD content to 1080p for simple integration of older displays. A useful troubleshooting feature of PUV-1550SRX is a 6G UHD HDMI Pattern Generator for testing locally connected displays. In addition to the full 5Play™ convergence, digital OAR
(Optical Audio Return) provides users the ability to transmit Optical Audio (48kHz) to the HDBaseT TX. The RX also features a analogue audio output providing users with total audio flexibility. The PUV-1550SRX also has on board EDID Management which is useful when troubleshooting connected displays.
The PUV-1550STX HDBaseT Transmitter/Scaler enables
transmission of video resolutions up to 4K UHD, along with HD audio,
2-Way IR, RS-232, PoH (Power over HDBaseT), and LAN signals up
to 100m. As well as a HDMI input, this unit features a local
HDMI output supporting video signals up to 4K@60Hz (4:4:4, 8-bit) and 4K@24Hz HDR. Full 4K UHD content for
transmission over the HDBaseT output signal can be converted to 4K@60Hz
(4:2:0, 8-bit) or 1080p@60Hz, in order to fit within HDBaseT
bandwidth limitations (10.2Mbps). Simple 4K UHD test patterns can also be outputted. 1080p signals can also be upscaled to 4K UHD and transmitted to the receiver. Control of remote devices is possible via bi-directional RS-232, IR
ports as well as a LAN connection. A analogue audio output provides
users with the ability to receive Optical Audio transmitted from the PUV-1550SRX or de-embed audio from the HDMI source. The PUV-1550SRX also has on board EDID Management which is useful when troubleshooting connected displays.
The PUV-1610RX Receiver will accept transmitted video resolutions up
to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over
HDBaseT), and LAN signals up to 100m. This solution provides advanced
signal management ensuring reliable results in the most demanding
installation environments. All audio, video, control, and power are
received simultaneously over a single CAT6a/7 cable up to 100m.
A key feature of the PUV-1600 series is that the power is sent to the TX
from the mains powered RX. This offers additional flexibility when
integrating and designing meeting room solutions.
The PUV-1610TX Transmitter enables transmission of video resolutions up
to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over
HDBaseT), and LAN signals up to 100m. This solution provides advanced
signal management ensuring reliable results in the most demanding
installation environments. All audio, video, control, and power are
transmitted simultaneously over a single CAT6a/7 cable up to 100m.
A key feature of the PUV-1600 series is that the power is sent to the TX
from the mains powered RX. This offers additional flexibility when
integrating and designing commercial AV systems.
The PUV-1620A-RX
HDMI over HDBaseT Receiver with
Amplifier is a 2 by 1 switch with standard HDMI and HDBaseT inputs and an HDMI
output as well as amplified stereo audio output. This unit’s HDBaseT input can
receive uncompressed high-definition 4K UHD (up to 10.2Gbps) video along with
Ethernet, RS-232 and IR control over a single cable up to a distance of 100
metres while the HDMI input supports high bandwidth 4K UHD
+ sources
(up to 18Gbps) with support for 10/12-bit HDR. Pass-through of multiple digital
audio formats such as LPCM (up to 8 channels), Bitstream and HD Bitstream is
also supported via the HDBaseT and HDMI inputs. Additionally, the integrated 3.5mm mini-jack and class D stereo amplifier outputs allow audio to be extracted from the selected source (LPCM 2.0 sources only) for
local sound reinforcement, ideal for small meeting spaces, classrooms or lecture theatres.
Signal management features such as automatic switching based on
input signal and hot plug detection enable convenient hands-free operation.
There are also four built-in switching relay connections allowing control over
direct power devices such as projection screens, curtains, lights, etc. Front
panel controls and a comprehensive WebGUI provide access to manual input
selection, volume control, as well as additional functionality such as EDID
management, HDCP management and control over the four relay ports.
This switching receiver is ideal for use in residential or
commercial point to point applications that require long HDBaseT signal
transmission distances such as home theatres, conference rooms, huddle rooms,
or lecture halls. The integrated PoH (Power over HDBaseT) feature can provide
power to compatible transmitters, providing greater flexibility in
installations. This unit can be controlled in a wide variety of different ways
including front panel buttons, WebGUI, Telnet, and RS-232.
The PUV-1620S-TX is designed to scale and
convert HDMI and PC video, with optional analogue audio embedding, for extension
over long distances to a compatible PUV-1600 Series HDBaseT Receiver. The HDMI input supports
resolutions up to 4K@60Hz (4:2:0) and the VGA input supports resolutions up to 1080p@60Hz/WUXGA@60Hz. The scaled HDBaseT output supports resolutions from 640×480@60Hz up to
4K@60Hz (4:2:0, 8-bit) and provides the ability to adjust the image with a
number of fine tuning options including: contrast, brightness, hue, saturation,
sharpness, noise reduction, and RGB levels.
In addition, this unit supports 7.1
channel LPCM digital audio as well as advanced Bitstream and HD Bitstream audio
formats via the HDMI input, or analog stereo audio may be embedded from the stereo mini-jack connector. Shortcut keys are provided to quickly
change the output resolution to 1080p or XGA when needed for quick connection
to a display or for troubleshooting purposes.
The unit can be powered
locally or via 48V PoH (Power over HDBaseT) from a compatible HDBaseT Receiver,
which allows for greater flexibility in commercial installations. The unit can be
controlled via front panel buttons with a comprehensive OSD.
The PUV-1630TTX is a brand new AV concept for the Commercial & Corporate channel. Presentation equipment in corporate meeting rooms can be difficult to operate and provide the user with challenges when connecting their source to the installed AV system. Flexible meeting rooms are also becoming more commonplace, which is where the PUV-1630TTX provides the perfect balance between ease of use and portability.
In collaboration with CMD the leading office power and lighting specialists, CYP has developed a dedicated HDBaseT switcher and Transmitter that fits seamlessly into the CMD 'Contour' range. Providing the user with a flexible AV solution that removes the boundaries of how a meeting space can be used.
The PUV-1630TTX Transmitter is a 2 x HDMI, 1 x VGA switch which allows uncompressed HDMI and VGA signals to be transmitted over a Single CAT5e/6/7 cable. This solution has the added features of analogue audio em-bedding and a LAN connection over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres to a compatible PUV-1600 Series Receiver. When a device is connected to the PUV-1630TTX, CEC control can be applied to 'power up' the connected display and select the correct HDMI input channel (programmed via the WebGUI).
This unit also supports automatic input detection between the HDMI and the VGA inputs using hot plug detection, offering the user 'hands free' control of the device. Despite the 10.2Gbps bandwidth limitation of HDBaseT this clever transmitter will automatically convert signals of higher bandwidths ensuring any HDMI 4KUHD signal can be passed through the HDBaseT system. The unit also features push button control on the front of the panel. The unit is powered by PoH supplied by a compatible PUV-1600 series receiver.
The PUV-1630TXWP Transmitter is a 2 x HDMI, 1 x VGA switch which allows uncompressed HDMI and VGA signals to be transmitted over a Single CAT5e/6/7 cable. This solution has the added features of analogue audio em-bedding and a LAN connection over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres to a compatible PUV-1600 Series Receiver. When a device is connected to the PUV-1630TXWP, CEC control can be applied to 'power up' the connected display and select the correct HDMI input channel (programmed via the WebGUI).
This unit also supports automatic input detection between the HDMI and the VGA inputs using hot plug detection, offering the user 'hands free' control of the device. Despite the 10.2Gbps bandwidth limitation of HDBaseT this clever transmitter will automatically convert signals of higher bandwidths ensuring any HDMI 4KUHD signal can be passed through the HDBaseT system. The unit also features push button control on the front of the panel. The unit is powered by PoH supplied by a compatible PUV-1600 series receiver.
The PUV-1630TXWP-UK Transmitter is a 2 x HDMI, 1 x VGA switch which allows uncompressed HDMI and VGA signals to be transmitted over a Single CAT5e/6/7 cable. This solution has the added features of analogue audio em-bedding and a LAN connection over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres to a compatible PUV-1600 Series Receiver. When a device is connected to the PUV-1630TXWP-UK, CEC control can be applied to 'power up' the connected display and select the correct HDMI input channel (programmed via the WebGUI).
This unit also supports automatic input detection between the HDMI and the VGA inputs using hot plug detection, offering the user 'hands free' control of the device. Despite the 10.2Gbps bandwidth limitation of HDBaseT this clever transmitter will automatically convert signals of higher bandwidths ensuring any HDMI 4KUHD signal can be passed through the HDBaseT system. The unit also features push button control on the front of the panel. The unit is powered by PoH supplied by a compatible PUV-1600 series receiver.
The PUV-1650RX has been designed with collaboration in mind, it's the
perfect turnkey solution for receiving and switching video in commercial
applications. The PUV-1600 series not only provide total AV conversion
and extension, they also add a level of system control throughout the
meeting space. The unit includes a HDMI Input and Output
offering total meeting space compatibility.
Sources can be received from upto 100m (1080p) and 4K@60Hz (4:2:0 8-bit) and over 70m by a CAT 6/7 cable. This receiver can
scale the HDBaseT video from the source or local HDMI input to match the
connected displays resolution requirements.
The PUV-1650RX differs
from other HDBaseT extender sets with its on board control relays that can be activated in a number of ways defined by the user. This could include, IP, RS232, Trigger or Push Button control. Complimentary control products
within the CYP range include the CR-TG1, CR-CS2 & CR-KP products.
A key feature of the PUV-1600 series is that the power is sent to the TX from the mains powered RX. This offers additional flexibility when integrating and designing meeting room solutions.
The PUV-1650TX has been designed with collaboration in mind, it's the perfect turnkey solution for extending and switching video in commercial applications. The PUV-1650TX/RX not only provide total AV conversion and extension, they also add a level of system control throughout the meeting space. The unit includes HDMI, DisplayPort & VGA inputs offering total meeting space compatibility.
Sources can be transmitted upto 100m (1080p) and 4K@60Hz (4:2:0 8-bit) can be transmitted over 70m over CAT 6/7 cable. The compatible receiver can scale the HDBaseT video source or local HDMI input to match the connected displays resolution requirements.
The PUV-1650 differs from other HDBaseT extender sets with its additional layer of control. This unit provides an interface for a remote control keypad or trigger interface which could be placed in a variety of installation scenarios (Lecterns, meeting room tables, podiums, etc...). This interface allows the user to control a wide range of devices and macro commands from the touch of a button over the local network. Complimentary control products within the CYP range include the CR-TG1 & CR-KP products.
The TX also features 'Top Panel' controls for direct control of the device (with OSD) and the added benefit of a WebGUI, RS232 and LAN control. Using the WebGUI interface timed events can be stored on the unit for added system control.
A key feature of the PUV-1600 series is that the power is sent to the TX
from the mains powered RX. This offers additional flexibility when
integrating and designing meeting room solutions.
The new PUV-1730LRX-AVLC Receiver enables video resolutions up
to 4K UHD including 10/12-bit HDR10 & Dolby Vision, to be received along with HD audio, 2-Way IR, RS-232, PoH (Power over
HDBaseT) signals from a distance of 70m. This
solution provides advanced signal management ensuring reliable results
in the most demanding installation environments. All audio, video,
control, and power are received simultaneously over a single CAT6a/7
cable up to 70m. Using the OAR (Optical Audio Return) feature, audio can be sent from the display or local source back to the TX.
Despite the 10.2Gbps limitation of HDBaseT™
technology, this groundbreaking product enables data rates of up to
18Gbps to be received using AVLC (Adaptive Visually Lossless
Compression) Technology. The receiver enables 4KUHD sources up-to and
including 4K@60Hz (4:4:4 8-bit) as well as 10/12 bit sources with HDR
(Including Dolby Vision) to be received over distance from a compatible transmitter. The
result is a perfect 6G 4K visually lossless image delivered to the display
screen.
The new PUV-1730LRX-AVLC Transmitter enables video resolutions up
to 4K UHD including 10/12-bit HDR10 & Dolby Vision, to be transmitted
along with HD audio, 2-Way IR, RS-232, PoH (Power over
HDBaseT) signals from a distance of 70m. This
solution provides advanced signal management ensuring reliable results
in the most demanding installation environments. All audio, video,
control, and power are received simultaneously over a single CAT6a/7
cable up to 70m. Using the OAR (Optical Audio Return) feature, audio can
be received from the display and de-embedded from this Transmitter.
Despite the 10.2Gbps limitation of HDBaseT™
technology, this groundbreaking product enables data rates of up to
18Gbps to be received using AVLC (Adaptive Visually Lossless
Compression) Technology. The receiver enables 4KUHD sources up-to and
including 4K@60Hz (4:4:4 8-bit) as well as 10/12 bit sources with HDR
(Including Dolby Vision) to be received over distance from a compatible transmitter. The
result is a perfect 6G 4K visually lossless image delivered to the display
screen.
The new PUV-1810RX-AVLC Receiver enables video resolutions up
to 4K UHD including 10/12-bit HDR & Dolby Vision, to be received along with HD audio, 2-Way IR, RS-232, PoH (Power over
HDBaseT) and LAN signals from a distance of 100m. This
solution provides advanced signal management ensuring reliable results
in the most demanding installation environments. All audio, video,
control, and power are received simultaneously over a single CAT6a/7
cable up to 70m.
Despite the 10.2Gbps limitation of HDBaseT™
technology, this groundbreaking product enables data rates of up to
18Gbps to be received using AVLC (Adaptive Visually Lossless
Compression) Technology. The receiver enables 4KUHD sources up-to and
including 4K@60Hz (4:4:4 8-bit) as well as 10/12 bit sources with HDR
(Including Dolby Vision) to be received over distance from a compatible transmitter. The
result is a perfect 6G 4K visually lossless image delivered to the display
screen.
The new PUV-1810TX-AVLC Transmitter enables video resolutions up
to 4K UHD including 10/12-bit HDR & Dolby Vision, to be transmitted along with HD audio, 2-Way IR, RS-232, PoH (Power over
HDBaseT) and LAN signals up to a distance of 100m. This
solution provides advanced signal management ensuring reliable results
in the most demanding installation environments. All audio, video,
control, and power are transmitted simultaneously over a single CAT6a/7
cable up to 70m.
Despite the 10.2Gbps limitation of HDBaseT™
technology, this groundbreaking product enables data rates of up to
18Gbps to be transmitted using AVLC (Adaptive Visually Lossless
Compression) Technology. The transmitter enables 4KUHD sources up-to and
including 4K@60Hz (4:4:4 8-bit) as well as 10/12 bit sources with HDR
(Including Dolby Vision) to be extended to a compatible receiver. The
result is a perfect 4K 6G visually lossless image delivered to the
display screen.
The new PUV-1820TX-AVLC Transmitter enables video resolutions up
to 4K UHD including 10/12-bit HDR & Dolby Vision, to be transmitted along with HD audio, 2-Way IR, RS-232, PoH (Power over
HDBaseT) and LAN signals up to a distance of 100m. This
solution provides advanced signal management ensuring reliable results
in the most demanding installation environments. All audio, video,
control, and power are transmitted simultaneously over a single CAT6a/7
cable up to 70m.
Despite the 10.2Gbps limitation of HDBaseT™
technology, this groundbreaking product enables data rates of up to
18Gbps to be transmitted using AVLC (Adaptive Visually Lossless
Compression) Technology. The transmitter enables 4KUHD sources up-to and
including 4K@60Hz (4:4:4 8-bit) as well as 10/12 bit sources with HDR
(Including Dolby Vision) to be extended to a compatible receiver. The
result is a perfect 4K 6G visually lossless image delivered to the
display screen.
The PUV-1820TX-AVLC features 1 x HDMI Input as well as a local HDMI output, providing flexible integration of a local screen to the TX.
The new PUV-1830RX-AVLC Receiver enables video resolutions up
to 4K UHD including 10/12-bit HDR & Dolby Vision, to be received along with HD audio, 2-Way IR, RS-232, PoH (Power over
HDBaseT) and LAN signals from a distance of 100m. This
solution provides advanced signal management ensuring reliable results
in the most demanding installation environments. All audio, video,
control, and power are received simultaneously over a single CAT6a/7
cable up to 70m. Using the OAR (Optical Audio Return) feature, audio can be sent from the display or local source back to the TX.
Despite the 10.2Gbps limitation of HDBaseT™
technology, this groundbreaking product enables data rates of up to
18Gbps to be received using AVLC (Adaptive Visually Lossless
Compression) Technology. The receiver enables 4KUHD sources up-to and
including 4K@60Hz (4:4:4 8-bit) as well as 10/12 bit sources with HDR
(Including Dolby Vision) to be received over distance from a compatible transmitter. The
result is a perfect 6G 4K visually lossless image delivered to the display
screen.
The new PUV-1830TX-AVLC Transmitter enables video resolutions up
to 4K UHD including 10/12-bit HDR & Dolby Vision, to be transmitted along with HD audio, 2-Way IR, RS-232, PoH (Power over
HDBaseT) and LAN signals up to a distance of 100m. This
solution provides advanced signal management ensuring reliable results
in the most demanding installation environments. All audio, video,
control, and power are transmitted simultaneously over a single CAT6a/7
cable up to 70m. This unit also features OAR (Optical Audio Return) allowing the user to extract Optical Audio transmitted from the HDBaseT Receiver.
Despite the 10.2Gbps limitation of HDBaseT™
technology, this groundbreaking product enables data rates of up to
18Gbps to be transmitted using AVLC (Adaptive Visually Lossless
Compression) Technology. The transmitter enables 4KUHD sources up-to and
including 4K@60Hz (4:4:4 8-bit) as well as 10/12 bit sources with HDR
(Including Dolby Vision) to be extended to a compatible receiver. The
result is a perfect 4K 6G visually lossless image delivered to the
display screen.
The
PUV-2010RXWP UK Wall Plate Receiver supports video resolutions up to 4K UHD,
along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT), LAN,
and USB data signals up to 100m. Utilising the latest HDBaseT™ 2.0
technology, this solution provides advanced signal management and
dedicated audio pathways to ensure reliable results in the most
demanding of installation environments. In addition to the full 5-Play
convergence, this device also incorporates OAR (Optical Audio Return)
and ARC (Audio Return Channel) functions which enable audio from a
compatible display to be routed back from the receiver unit to the
transmitter. All audio, video, control, and power are transmitted
simultaneously over a single CAT6a/7 cable up to 100m.
This system also allows the connection of any USB host, enabling a USB 2.0 connection to 2 x USB ports, giving the PU-2010RXWP Receiver the ability to act as a USB hub.
This wall plate variant of the PUV-2010RX receiver enables seamless integration into a standard UK double-gang back box.
The
PUV-2010TX Wall Plate Transmitter enables transmission of video
resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH
(Power over HDBaseT), LAN, and USB data signals up to 100m. Utilising
the latest HDBaseT™ 2.0 technology, this solution provides advanced
signal management and dedicated audio pathways to ensure reliable
results in the most demanding of installation environments. In addition to
the full 5-Play convergence, this device also incorporates OAR (Optical
Audio Return) and ARC (Audio Return Channel) functions which enable
audio from a compatible display to be routed back from the receiver unit
to the transmitter. All audio, video, control, and power are
transmitted simultaneously over a single CAT6a/7 cable up to 100m.
This system also allows the connection of any USB host, enabling a USB 2.0 connection to 2 x 2 USB ports, giving the PU-2010RX Receiver the ability to act like a USB hub.
This wall plate variant of the PUV-2010TX transmitter enables seamless integration into a standard UK double-gang back box.
The PUV-442-4K22
HDMI/HDBaseT Matrix supports the transmission of video (resolutions up to
4K2K@60Hz, HDCP 2.2, HDMI2.0) and multi-channel digital audio from 4 HDMI sources
to 4 HDBaseT Lite outputs and 2 independent HDMI2.0 outputs. The HDBaseT
outputs allow transmission via a single CAT5e/6/7 cable up to 100m, whilst the
independent HDMI outputs support cable lengths of up to 10m. This matrix
supports high resolution digital audio formats such as LPCM 7.1CH,Dolby TrueHD,
Dolby Digital Plus, Dolby Atmos and DTS-HD Master Audio as well as 3D video
content.
The PUV-442-4K22 matrix
incorporates an independent audio matrix with 6 audio outputs and 4 audio
inputs. These outputs and inputs can be used for de-embedding HDMI audio
to feed the audio outputs and embedding this audio to the HDBaseT and HDMI outputs.
In addition, volume, mute, treble, bass and audio lip-sink
correction control are available on all direct audio outputs. Optical
Audio Return (OAR) Technology allows the optical input on the PUV-1530PL-RX
receiver to be routed back to the audio matrix.
LAN connectivity provides a 100BaseT network for smart TV's or
games consoles in every zone. The Power over HDBaseT (PoH) function provides power to
compatible receivers.
Control is via manual
selection buttons, IR, RS-232, Telnet or Web GUI. CYP provide control drivers
for all the major control systems. This unit also supports RS232 pass-through
to the receivers.
The PUV-442-4K22 is designed
to be used with PUV-1530RX or PUV-1510RX receivers that can utilise the PoH capabilities of the matrix.
The
PUV-44XPL-AVLC is the next generation of 4 x 4 matrices from CYP, taking much of its heritage from the successful PUV-44XPL-4K22. The Matrix supports the transmission of
video
(resolutions up to 4K UHD 10/12-bit HDR & Dolby Vision, HDCP 2.2,
HDMI2.0) and multi-channel
digital audio from 4 HDMI sources to 4 HDBaseT outputs. Despite the 10.2Gbps limitation of HDBaseT™
technology, this groundbreaking product enables data rates of up to
18Gbps to be transmitted using AVLC (Adaptive Visually Lossless
Compression) Technology. The transmitter enables 4KUHD sources up-to and
including 4K@60Hz (4:4:4 8-bit) as well as 10/12 bit sources with HDR
(including Dolby Vision) to be extended to a compatible receiver included in the kit. The
result is a perfect 4K 6G visually lossless image delivered to the
display screen.
The
PUV-44XPL-AVLC supports independent video output scaling on two of the
HDBaseT outputs. This is particularly useful when transmitting a
4K HDR image from the matrix to a standard 1080p HD display within an AV
setup.
The HDBaseT outputs allow transmission via a single CAT5e/6/7 cable up to
60m (40m HDR Content). This matrix supports high resolution digital audio formats such as
LPCM 7.1CH,Dolby TrueHD, Dolby Digital Plus, Dolby Atmos and DTS-HD
Master Audio as well as 3D video content.
This
matrix also features audio breakout whereby de-embedded analogue L/R
audio outputs are provided for each of the HDBaseT zones (A to D). The
Power over HDBaseT (PoH) function provides power to the supplied
PUV-1710LRX-AVLC receivers which also support 2-way IR and RS-232 pass-through.
Control
is via manual selection buttons, IR, RS-232, Telnet or Web GUI. CYP
provide control drivers for all major control systems.
The PUV-662-4K22
HDMI/HDBaseT Matrix supports the transmission of video (resolutions up to
4K2K@60Hz, HDCP 2.2, HDMI2.0) and multi-channel digital audio from 6 HDMI sources
to 6 HDBaseT outputs and 2 independent HDMI2.0 outputs. The HDBaseT outputs
allow transmission via a single CAT5e/6/7 cable up to 100m, whilst the
independent HDMI outputs support cable lengths of up to 10m. This matrix
supports high resolution digital audio formats such as LPCM 7.1CH,Dolby TrueHD,
Dolby Digital Plus, Dolby Atmos and DTS-HD Master Audio as well as 3D video
content.
The PUV-662-4K22 matrix
incorporates an independent audio matrix with 8 audio outputs and 4 audio
inputs. These outputs and inputs can be used for de-embedding HDMI audio
to feed the audio outputs and embedding this audio to the HDBaseT and HDMI outputs.
In addition, volume, mute, treble, bass and audio lip-sync correction control are available on all direct audio outputs. Optical
Audio Return (OAR) Technology allows the optical input on the PUV-1530RX receiver
to be routed back to the audio matrix.
LAN connectivity provides a 100BaseT network for smart TV's or
games consoles in every zone. The matrix has a built-in pattern generator
which can be used to verify the video signal on any of its 8 output ports. The
Power over HDBaseT (PoH) function provides power to compatible receivers.
Control is via manual
selection buttons, IR, RS-232, Telnet or Web GUI. CYP provide control drivers
for all the major control systems.
The PUV-662-4K22 is designed
to be used with PUV-1530RX or PUV-1510RX receivers that can utilise the PoH capabilities of the matrix.
The PUV-662PL-4K22
HDMI/HDBaseT Matrix supports the transmission of video (resolutions up to
4K2K@60Hz, HDCP 2.2, HDMI2.0) and multi-channel digital audio from 6 HDMI sources
to 6 HDBaseT Lite outputs and 2 independent HDMI2.0 outputs. The HDBaseT
outputs allow transmission via a single CAT5e/6/7 cable up to 60m, whilst the
independent HDMI outputs support cable lengths of up to 10m. This matrix
supports high resolution digital audio formats such as LPCM 7.1CH,Dolby TrueHD,
Dolby Digital Plus, Dolby Atmos and DTS-HD Master Audio as well as 3D video
content.
The PUV-662PL-4K22
matrix incorporates an independent audio matrix with 8 audio outputs and 4
audio inputs. These outputs and inputs can be used for de-embedding HDMI
audio to feed the audio outputs and embedding this audio to the HDBaseT and
HDMI outputs. In addition, volume, mute, treble, bass and audio
lip-sync correction control are available on all direct audio outputs.
Optical Audio Return (OAR) Technology allows the optical input on the PUV-1230PL-RX
receiver to be routed back to the audio matrix.
The matrix has a built-in pattern generator which can be used to
verify the video signal on any of its 8 output ports. The
Power over HDBaseT (PoH) function provides power to compatible receivers.
Control is via manual
selection buttons, IR, RS-232, Telnet or Web GUI. CYP provide control drivers
for all the major control systems. This unit also supports RS232 pass-through
to the receivers.
The PUV-662PL-4K22 is designed
to be used with PUV-1230PL-RX or PUV-1210PL-RX receivers that can utilise the
PoH capabilities of the matrix..
The QU-10-4K22 Distribution Amplifier (splitter) accepts one HDMI input and splits this signal to ten identical outputs. This device supports 4K2K Ultra-High Definition video with HDMI2.0 and HDCP2.2 compliance. In addition, 3D Video signals and High Definition Audio formats such as LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus, Dolby Atmos and DTS-HD Master Audio, audio sampling rate up to 192kHz are also supported. Each buffered output can run 1080p/8-bit up to 20 metres and can also be cascaded up to 3 layers.
The QU-28S-4K22 is an advanced signal distribution tool providing high performance audio and video support including HDR and other features defined by the HDMI 2.0a specification. 4K HDR video sources, up to and including 4K@60Hz (4:4:4, 8-bit) as well as 10/12-bit sources with HDR, are able to be distributed across the 8 outputs. Pass-through of multiple digital audio formats such as LPCM 7.1, Bitstream and advanced HD Bitstream with audio sampling rates up to 192kHz are also supported. An independent HDCP management engine for each output ensures stable HDCP performance.
This Distribution Amplifier also includes a special “Group Mode” which allows the unit to function as two independent 1×4 splitters. When Group Mode is enabled, each of the 2 HDMI inputs are routed to their own discrete set of 4 outputs.
When a mixture of displays with different specifications are connected, each output can be configured to scale 4K to 1080p or apply color space conversion (4:4:4 to 4:2:0), as appropriate. Support for the CEC “active source” can be enabled command to periodically reset input selection on CEC compatible connected displays. This unit provides an intuitive set of front panel controls with an OSD as well as RS-232 control options.
This QU-4-4K22 is more than just a Distribution Amplifier, it provides high performance audio and video support including HDR and other
features defined by the HDMI 2.0a specification. 4K UHD HDMI video sources, up
to and including 4K@60Hz (4:4:4, 8-bit) as well as 10/12-bit sources with HDR,
are able to be 'Split' to the 4 x HDMI outputs. Pass-through of multiple digital
audio formats such as LPCM 7.1, Bitstream and advanced HD Bitstream with audio
sampling rates up to 192kHz are also supported. An independent HDCP management
engine for each output ensures stable HDCP performance.
When a mixture of displays with different
specifications and resolutions are connected, each output can automatically scale 4K to 1080p
or apply color space conversion (4:4:4 to 4:2:0), as appropriate, based on each
connected display’s EDID requirements. CEC "active source" command can be enabled to
periodically reset input selection on CEC compatible connected displays. This unit is controlled via front-panel switches with easy
to read status LED's.
The QU-8-4K22 Distribution Amplifier (splitter) accepts one HDMI input and splits this signal to eight identical outputs. This device supports 4K2K Ultra-High Definition video with HDMI2.0 and HDCP2.2 compliance. In addition, 3D Video signals and High Definition Audio formats such as LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus, Dolby Atmos and DTS-HD Master Audio, audio sampling rate up to 192kHz are also supported. Each buffered output can run 1080p/8-bit up to 20 metres and can also be cascaded up to 3 layers.
The RE-101-4K22 is designed to enhance and stabilize high-bandwidth HDMI signals, allowing the user to extend a UHD 4K, HDMI 2.2 signal an additional 5m whilst also providing the function of customized EDIDs. The
built in EDID management support allows the user to easily switch between three
distinct EDIDs (Internal, External, and User). With the use of the optional PC
software it is possible to create, edit, upload or download the customized User
EDID. The unit’s toggle switch and simple LED design allows the user to
quickly switch between different configurations while viewing EDID status
information.
The
RE-EDID-4K22 is designed to manage and manipulate the HDMI/DVI EDID information
provided to a HDMI source device by a connected display. EDID contains critical
information about the capabilities of the connected display, including audio
and video format support, HDMI feature support, etc. This product aims to
simplify the technical complications that often arise when performing video
system integration, home cinema installation, integrating commercial displays
or audio/video equipment testing. It also supports EDID Emulation and
Bypass modes. This device is perfect to overcome source and screen
compatibility issues, particularly when integrating PC's into an AV system.
The SDV-CS8 is a powerful and flexible solution for controlling multiple SDVoE extenders within same network. The SDV-CS8 provides effortless configuration of the extenders (Transmitters, Receivers or Transceivers) to easily define and configure channel routing using the WebGUI. It is also possible to define and switch routes using customized groups or presets over multiple video zones.
Additionally, this unit supports controlling the matrix, video wall, and multiviewer modes of connected SDVoE extenders. Dependent on the scaler mode, this product supports instant switching between selected video transmitters. The settings of all connected Transmitter/Receiver units, including IP address, Subnet mask and extender status are clearly displayed within the WebGUI. The WebGUI is easily accessed via a web browser over a normal network connection or by connecting an HDMI display and USB keyboard & mouse to the SDV-CS8. A trigger input interface is also provided to allow the easy addition of a remote control keypad, or other trigger-supporting products, which can be installed within a lecturn or table within a conference room or classroom environment. This interface can allow the user to activate stored presets with the simple press of a button. Standard control is available via WebGUI (remote or local), RS-232, Telnet, IR Remote and triggers.
The
SDV-CTRX is designed to transmit, 4K HDR (6G) signals over a 10G IP Network with almost zero latency. Every Transceiver can be
configured to function as either a Transmitter or a Receiver, providing
additional flexibility for any installation. Using a sophisticated
ultra-light compression (lossless for most content) it’s the perfect
solution for extending 4KHDR video (HDMI or DisplayPort) and data.
Advanced HDMI content such as HDR (High Dynamic Range), 10-bit color and
multi-channel HD Bitstream audio can be transmitted in pass-through
mode. Multiple control and data signals
may also be transmitted along with the audio and video, including IR,
(RS-232 Future Development) USB (for KVM) and Ethernet.
Multiple
Transceivers may be combined with one or more 10-Gigabit Ethernet
switches and the units can be used together to form a distributed video
matrix, a multi-viewer system, or a video wall system adding to their
flexibility in large event installations (Control Hardware Required).
The built-in EDID and HDCP management offers additional installation
flexibility. Basic configuration of the unit can be achieved via front
panel buttons with an On-Screen Display (OSD). Advanced control requires
optional control software and a LAN connection.
The SDV-FRX/FTX Transmitter and Receiver set are designed to deliver high-quality, IP routable, AV extension with minimum latency. By
using a sophisticated ultra-light compression technology (lossless for most
content) it’s the perfect solution for extending 4K audio/video signals (HDMI/DisplayPort-transmitter dependent) and data over long distance. Advanced HDMI content such as HDR (High Dynamic Range),
10-bit color and multi-channel HD Bitstream audio can be transmitted in
pass-through mode. The use of interchangeable, field replaceable, SFP+ modules
allows for transmission distances of up to 30km (Maximum transmission distance
depends on the SFP+ modules used.). Multiple control and data signals may also
be transmitted along with the audio and video, including IR, RS-232, USB (for
KVM) and Ethernet.
When combined with the optional control software, the functionality of the extenders expands
exponentially. Multiple Transmitters and Receivers may be combined with one or
more 10Gb fiber Ethernet switches and the units can be used together to form a distributed
video matrix, a multi-viewer system, or a video wall system adding to their
flexibility in large commercial installations.
The SDV-FTRX is designed to transmit, 4KHDR (6G) signals over a 10G IP Fiber Network with almost zero latency.Every Transceiver can be configured to function as either a Transmitter or a Receiver, providing additional flexibility for any installation. Using a sophisticated ultra-light compression (lossless for most content) it’s the perfect solution for extending 4K HDR video (HDMI or DisplayPort) and data. Advanced HDMI content such as HDR (High Dynamic Range), 10-bit color and multi-channel HD Bitstream audio can be transmitted in pass-through mode. The use of interchangeable, field replaceable, SFP+ modules allows for transmission distances of up to 30km (Maximum transmission distance depends on the SFP+ modules used). Multiple control and data signals may also be transmitted along with the audio and video, including IR, (RS-232 Future Development) USB (for KVM) and Ethernet.
Multiple Transceivers may be combined with one or more 10-Gigabit fiber Ethernet switches and the units can be used together to form a distributed video matrix, a multi-viewer system, or a video wall system adding to their flexibility in large event installations (Control Hardware Required). The built-in EDID and HDCP management offers additional installation flexibility. Basic configuration of the unit can be achieved via front panel buttons with an On-Screen Display (OSD). Advanced control requires optional control software and a LAN connection.
The SDV-FRX/FTX Transmitter and Receiver set are
designed to deliver high-quality, IP routable, AV extension with
minimum latency. By
using a sophisticated ultra-light compression technology (lossless for
most
content) it’s the perfect solution for extending 4K audio/video signals
(HDMI or
DisplayPort) and data over long distance. Advanced HDMI content such as
HDR (High Dynamic Range),
10-bit color and multi-channel HD Bitstream audio can be transmitted in
pass-through mode. The use of interchangeable, field replaceable, SFP+
modules
allows for transmission distances of up to 30km (Maximum transmission
distance
depends on the SFP+ modules used.). Multiple control and data signals
may also
be transmitted along with the audio and video, including IR, RS-232, USB
(for
KVM) and Ethernet.
When combined with the optional control software, the functionality of the extenders expands
exponentially. Multiple Transmitters and Receivers may be combined with one or
more 10Gb fiber Ethernet switches and the units can be used together to form a distributed
video matrix, a multi-viewer system, or a video wall system adding to their
flexibility in large commercial installations.
This SY-12H-4K22 is designed to upscale 1080p
signals into 4K UHD (18Gbps) or downscale 4K UHD (18Gbps) signals into 1080p
with synchronized digital audio output. The user friendly interface provides simple control of the unit while viewing the OSD directly on the HDMI
outputs. The input signal can be outputted to both HDMI outputs simultaneously
with a different resolution on each or the unit can generate a test pattern at
a preferred video resolution for easy on-site display testing.
The unit also includes comprehensive EDID and
HDCP management, and basic signal event automation via RS-232 or CEC.
This unit can be controlled easily by the front panel buttons (with
OSD) or by RS-232.
This SY-300H-4K22 accepts and outputs a wide
range of resolutions up to 4K@60Hz (4:4:4, 8-bit) with simultaneous audio
embedding and de-embedding of digital (HDMI or optical) or analogue audio.
Integrated EDID and HDCP management allow for control over the
connected sources and displays detected by the unit. The scaled HDMI output is
powered by a high quality single-pass scaling engine with the ability to adjust
the image with a number of fine tuning options including: contrast, brightness,
hue, saturation, sharpness, noise reduction, and RGB levels. 3-D motion
adaptive de-interlacing and frame rate conversion is supported as well.
The HDMI input and output supports passing
up to LPCM 7.1 digital audio as well as Bitstream and HD Bitstream audio
formats. Audio embedding and de-embedding is also available with the included
digital optical and analogue stereo audio inputs and outputs (LPCM 2.0 only).
Shortcut keys allow the user to quickly change the output resolution to
1080p@60Hz or XGA when needed for quick connection to a display or for
troubleshooting purposes.
This is an ideal device to integrate
previously incompatible sources and displays in your boardroom, classroom, or
home. This unit is controlled via a comprehensive On-Screen Display (OSD) menu
that provides the user with easy access to all settings.
The SY-4KS4K22 HDMI Scaler is designed to upscale 1080p resolutions to 4K Ultra High Definition (UHD) resolutions, or downscale a UHD 4K signal to 1080p for integration into any AV system. This scaler utilises the lastest HDMI2.0 and HDCP2.2 technology ensuring the highest level of compatibility available. The ability to downscale 4K signals to 1080p is a crucial function when working with 4K sources in a complex AV system and distributing the HDMI source signals to multiple displays which have varying resolution support.
The SY-4KS-4K22 incorporates two HDMI outputs, one of which can upscale or bypass (input follows output) and the second can downscale or bypass the incoming signal. The SY-4KS-4K22 allows the user to select the highest supported resolution between the source and the each connected display. Both the bypass output and scaled output operate simultaneously.
Additionally the SY-4KS-4K22 has a number of other key features including a Deep Colour Conversion of 12 or 10 bit conversion to 8 bit, including HDR down convert for non-HDR displays. For further compatibility with legacy displays, there is also an on-board HDCP conversion tool enabling HDCP2.2 to be converted for use with HDCP1.4 compliant displays. Lastly, the SY-4KS-4K22 has an on-board Digital to Analogue audio Converter (DAC) enabling stereo analogue audio breakout via RCA connectors on the rear of the device.
This is a compact yet versatile 4K UHD HDMI
and PC/HD to HDMI Scaler. It accepts a wide range of resolutions from 480i up
to 1080p/WUXGA for PC/HD and up to 4K@60Hz (4:4:4) for HDMI with the ability to
scale the output to a selectable resolution up to 4K@60Hz (4:4:4) with
simultaneous de-embedded, digital optical and analog audio outputs. This unit also supports 3D signals.
The SY-HDVGA-4K22 also has auto source detection and switching feature allowing the unit to switch automatically
to the most recently connected source, or to switch to an alternative source if
the current one becomes disconnected.
This unit has a comprehensive OSD menu that
provides the user with easy access to all settings. An integrated hot-key
design makes for rapid access to common functions such as input selection and
audio volume. This is an ideal device to integrate previously incompatible sources
and displays or to provide a flexible auto-detecting input point for multiple installation scenarios.
Testing the integrity of an HDMI cable is essential for any professional AV Installer. As commercial and residential systems are upgraded the demands on HDMI
cables to deliver the best possible image are becoming greater and can often be overlooked, particularly when delivering HDR content.
The XA-3P is the perfect installation partner for an AV installer, providing a convenient way to test and verify all aspects of an HDMI Signal Path, including the source and the sink. As well as being HDMI 2.0a and HDCP 1.4 & 2.2 compliant, the unit has a number of testing features including... System Analyzing, Cable Testing, Pattern Generator & EDID Management. The XA-3P also has scaling functionality enabling the user to down-scale a 4K UHD Source to 1080p in Analyzer Mode.
A key feature of the XA-3P is the Cable Testing mode. In this mode the user can test the integrity of a HDMI cable, this is especially useful when trying to determine if a cable is capable of passing data rates of up to 18Gbps. The test results can be displayed on the LCD display or a connected display.
The front panel controls are very simple to navigate and the HDMI I/O is easily accessed on the top of the device. The XA-3P is battery operated giving the AV Installer ultimate flexibility in challenging installation scenarios. The battery can be recharged via it's USB connector or mains powered through the same port.
Designed to help protect your HDMI devices, the XA-HSP is a crucial tool when installing HDMI systems in locations where there can be power fluctuations caused by unstable mains power or where the site is susceptible to earthing problems or lightning strikes. Installers feedback has identified this as an issue in some geographical locations worldwide, along with applications for test beds, outside broadcast vehicles, old buildings such as places of worship, and for marine installations to name a few examples. As a completely passive device, there is no need for a PSU to be connected and thus simply connecting the XA-HSP in-line on the HDMI signal path will protect all HDMI equipment from voltage surges.
The XA-HSP is HDCP2.2 compliant and will support 4K/UHD resolutions including HDR. In addition, 3D Video signals and High Definition Audio formats such as LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus, Dolby Atmos and DTS-HD Master Audio are also supported.