The DS-MSC is designed to manage audio and video signals to emulate a video wall when using third-party screens. This controller will control the digital signage content for each screen on a video wall system using up to 25 screens. One controller is required per screen. If the user has only one HDMI or VGA source, then an appropriate Distribution Amplifier (Splitter) will be required to split the source signal to each of the Multi-Screen Controllers feeding the screens.
The 1 by 4 HDMI TV Wall controller allows an HDMI input source to be displayed, in full screen or single mode, on up to 4 HDMI displays (TV or monitor). Multiple units can be cascaded to extend the HDMI signal up to as many displays as needed. The unit features bezel correction function. A simple control application enables users to control single or multiple units. The device supports video timings up to WUXGA@60RB and 1080p@60Hz, audio format up to 7.1CH LPCM at 192kHz sampling rate based on input source EDID. Control can be achieved through software application (Compatible with Microsoft Windows XP & 7 Only), Telnet and RS-232.
The
DS-MSC14-4K enables a 4K video wall to be created from any third party screens,
the HDMI source can be displayed as a single image on each screen or 1 image
across all screens. A single unit will create a 2x2 video wall. Multiple units can be combined with an HDMI distribution amp to create larger video wall configurations. Control is via RS-232, Telnet IP and our downloadable application
which will allow full control of the DS-MSC14-4K from adjusting the bezel
correction to pre-set video wall layouts.
The CAT5/6 RS-232 extender is a hardware-based solution providing control of any RS-232 protocol device. This transmitter and receiver set will extend the control of RS-232 for over 250 meters. The RS-232 extender also provides full duplex transmission and hardware handshake signals, with no need for any set up or configuration.
The IR Extender and the Repeater set is perfect for controlling IR controlled source equipment over long distances. Up to five sources can be controlled using this extender set. Two sources can be controlled located locally to the repeater, whilst the remaining three sources can be controlled locally to the extender, which can be located up to 250m away via CAT5/6 cable. This system allows for the sources to be controlled by their own original remote controls, from extended distances. A 5-eye emitter accessory can be supplied for additional control of extra source equipment.
The RE-EDID is designed to allow the
adjustment and manipulation of HDMI/DVI EDID information that is provided to a source
device by a connected display so that it may output the correct
video/audio signal. Aiming to simplify the technical complications
involved in video/audio system integration, home theatre installation, and video/audio equipment testing, the unit features a learning
function allowing the user to Read and Write the video/audio EDID to the
system. It also supports EDID Emulation and Bypass modes. This device is perfect to overcome source and screen compatibility issues, particularly when integrating PC's into an AV system.
The RE-PI Power Inserter is used to insert power into a HDMI signal path for self-powering compatible HDMI products. This device is the perfect partner to the CYP RE-HDEQ HDMI Equaliser, for use when the HDMI source is not capable of sending power to the Equaliser. The RE-PI is capable of inserting up to 5V/2A into the HDMI signal path and the connected device may draw power up to this rating.
The XA-1 is the perfect analysis tool for AV installers and integrators. This device allows the user to analyse AV sources for resolution and EDID information whilst also providing pattern generation and test functions for identifying display capabilities. This small but advanced HDMI analyser also supports the analysis and pattern generation of 3D signals. This allows the user to check compatibility between sources and displays and provides a means of identifying system problems for troubleshooting.
The XA-2 is an advanced yet compact and convenient pattern generator for testing and troubleshooting HDMI devices. There are 6 resolution settings covering 4K Ultra HD and Full HD resolutions, 4 test patterns, HDCP (1.4, 2.2 and non-HDCP), and 3 audio settings each providing a large array of test signals. With simple to use control via buttons on the front panel, and LED indicators for quick viewing of the current status, this pattern generator is a must have tool for any professional AV integrator.
The XA-4 Advanced HDMI Pattern Generator and Analyser is an integrators tool for producing 4K HDMI signals for verifying and testing wider AV installations. This device has 54 resolutions settings, 47 test patterns, and 6 analysis tests which provide over a thousand different combinations of test scenarios. It supports HDMI data packets, EDID & HDCP analysis, EDID emulation, and allows the user to save 2 custom patterns, along with the ability to generate audio up to 8 channels.
Front panel keys allow fast switching between the various functions and an OLED screen allows for quick viewing of current status information. Control is via front-panel buttons, IR, RS-232, and Telnet allowing users full flexibility in controlling the device.
The XA-HDCP is designed to enable installers to manage HDCP (High-Bandwidth Definition Content Protection) signals. Since the introduction of HDCP2.2, which is not backwards compatible with previous versions, installers face the challenge of managing copy protected content to allow AV signals to be integrated into any AV system. This device converts HDCP2.2 signals to a lower HDCP format enabling AV content to be easily integrated into a system which uses non-HDCP2.2 compliant devices, thus eliminating the need to upgrade all devices in the signal path to be HDCP2.2 compliant.
In addition to converting HDCP signals, the XA-HDCP can also analyse the content bandwidth, HDCP, EDID and Colourspace status of the inputted signal. Further features include the ability to upload EDID settings to a PC application which allows the user to create alternative EDID settings for specific applications. In addition, the XA-HDCP also acts as a HDMI repeater which equalises and recovers TMDS data before re-transmitting, thus ensuring optimal quality regardless of the incoming signal. This equalisation and repeater function enables the HDMI cable distance to be extended 5m from the output at full 4K (6G) resolution.
Control is via the direct selection keys, which allow easy switching between modes, and status LED's provide 'at-a-glance' viewing of the device status.
The XA-S11 high performance HDMI v1.3 synchroniser allows the user to set up a firm EDID and CEC connection between the source and the display, eliminating the time spent on signal configuration before receiving the signal.
For installations where space is a premium, such as wall-mounted flat-screen TV's, our latest Ultra Slim HDMI cable range offers the same high speed performance in a far more discreet package. Sporting the same specification, compatibility, and reliability as the High Speed with Ethernet HDMI cable range, Ultra Slim HDMI cable cables are available in 0.5m, 1m, 1.5m, 2m and 3m lengths.
The CR-KP1 is a wall-mount keypad control
system and is ideally suited for any AV install environment such as conference/meeting rooms, classrooms, and home cinemas allowing
commands for multiple devices such as the EL-5500 to be programmed into one
easy to use device. The CR-KP1 supports PoE (Power over Ethernet) or a DC power supply and allows full control of any devices that are on the same local network and support IP Telnet control, additionally the CR-KP1 also incorporates two contact-closure connections allowing control of third party devices such as a powered
projector screens. The CR-KP1 includes a scheduling function allowing macros to be implemented at a pre-selected time and date, for example turning all the equipment off at the end of the day.
All the features of the CR-KP1 can be programmed using the
Web Gui which can be accessed by simply searching the IP address in your
internet browser.
We have also introduced our own piece of software the CYP Discovery Protocol Service which will locate any CYP product on a network and display there product code and IP address. This piece of software can be found on the downloads tab of this page along with a application guide.
The CR-KP2 is a wall-mount keypad control system and is ideally suited for any AV install environment such as conference/meeting rooms, classrooms, and home cinemas allowing commands for multiple devices such as the EL-5500 to be programmed into one easy to use device. The CR-KP2 supports PoE (Power over Ethernet) or a DC power supply and allows full control of any devices that are on the same local network and support IP Telnet control, additionally the CR-KP2 also incorporates a contact-closure connection allowing control of third party devices such as a powered projector screens. The CR-KP2 includes a scheduling function allowing macros to be implemented at a pre-selected time and date, for example turning all the equipment off at the end of the day.
All the features of the CR-KP2 can be programmed using the Web Gui which can be accessed by simply searching the IP address in your internet browser.
We have also introduced our own piece of software the CYP Discovery Protocol Service which will locate any CYP product on a network and display there product code and IP address. This piece of software can be found on the downloads tab of this page along with a application guide.
Single infrared emitting diode blinking.
Dual infrared emitting diode blinking.
Triple infrared emitting diode blinking.
The ebode IR Link B is a battery powered InfraRed Extender System that allows full remote control operation of audio / video components (such as your BluRay Player, DVR, AV Receiver, Satellite Receiver etc) which are located behind closed cabinet doors or other concealed and/or out of sight locations.
Ebode's proprietary eIRx (pronounced Irex) Technology guarantees a high level of immunity for InfraRed noise of direct sunlight, CFL lighting, and flat panel TV's (including plasma's, LCD, LED / OLED). Provides accurate reproduction of the latest generation InfraRed codes that are used in remote controls of, for instance, Set Top Boxes and Media Players. The IR Link B runs on a 9V battery (not included).
The ebode IR Link C is a mains powered InfraRed extender system that allows full remote control operation of audio / video components (such as BluRay Player, AV Receiver, DVR, Satellite receiver etc) which are located in another room sending the signals over existing coax cabling (CATV).
Ebode's proprietary eIRx (pronounced Irex) Technology guarantees a high level of immunity for IR noise from direct sunlight, CFL lighting and flat panel TV's (including plasma, LCD and LED/OLED). Provides accurate reproduction of the latest generation IR codes that are used in remote controls of, for instance, Set Top Boxes and Media Players. The IR Link C runs on a 12V DC mains adapter (included) and is expandable with extra IR Link receivers in different rooms.
The ebode
IR Link P is a mains powered InfraRed Extender system that allows full remote control operation of up to 3 different AV components (such as TV, DVD, or Hi-Fi) that are located in the same concealed or out-of-sight location.
Situate the table-top receiver in a prominent location in view of your normal seating positions to accept IR commands from your remote controls. This is then distributed through the system to 3 individual IR emitters that are placed in front of your AV equipment's IR windows that are hidden away from normal view.
The ebode IR Link Pro Flush is a mains powered InfaRed Extender System that allows full remote control operation of audio/video components (such as your Blu-ray player, A/V Receiver, DVR, Satellite Box, Cable Tuner , etc.) which are located behind closed cabinet doors, in other rooms, or other concealed and/or out-of-sight locations.
A mains powered miniature InfraRed Extender system that allows full remote control operation of up to 3 AV components (such as TV, DVD, or Hi-Fi) that are located behind closed cabinet doors, in other rooms, or other concealed and/or out-of-sight locations.
Extra Receiver for ebode IRLink Pro Flush - Mains Powered IR Extender Kit
See the main product for full details - EB-IRLPRFK
ebode Extra Receiver for IRLink Pro Mini - Mains Powered InfraRed Remote Control Extender
See the main product for full details - EB-IRLPRMK
A mains powered InfraRed Extender system that allows full remote control operation of up to 3 AV components (such as TV, DVD, or Hi-Fi) that are located behind closed cabinet doors, in other rooms, or other concealed and/or out-of-sight locations.
Wireless Infared Extender
Control any A/V source such as Cable box, Satellite receiver, DVD, VCR, HiFi, from a distant TV, with your existing remote control, even through walls and ceilings! Range is 30 – 100 meters (depending on environmental conditions).
The ebode proprietary eIR2x (pronounce Irex) Technology guarantees a high level of immunity for InfraRed noise from direct sunlight, CFL lighting and Flat Panel TV's (including Plasma, LCD and LED).
ebode Extra Receiver for Powermid Classic (PM10C) wireless IR extender.
For full details see the main product EB-PM10C
ebode Extra Receiver for the Powermid Premium (PM28) Wireless Infared Extender.
See the main product for full details - EB-PM28
ebode Extra Transmitter for Powermid Classic (PM10C) wireless IR extender.
For full details see the main product - EB-PM10C
ebode Extra Transmitter for Powermid Premium (PM28) Wireless Infared Extender.
See the main product for full details - EB-PM28
Universal remote control for up to 10 AV appliances including ebode Home Automation. Works with present and future equipment (pre-programmed and learning capability).
Stylish and easy-to-use universal remote control for up to 6 audio video devices.
Universal remote control for up to 6 AV appliances including ebode Home Automation. Works with present and future equipment (pre-programmed and learning capability). With easy to use 'Macro' function, switch all equipment to the desired setting with one press of a button.
Update design now available.
The GC-100 Network Adapter connects a TCP/IP network to infrared (IR), serial and relay communications-including sensor inputs-that can work, interrupt, or be polled by another network device. An embedded web server allows easy configuration from any browser. Control IR, Serial, Contact Closure Devices over a Network.
The GC-BL2 is designed for use with the Global Caché GC-100 Network Adapters to transmit IR signals across a room up to 40 feet. No power supply or connecting block is required for use.
With an IR modulation frequency range of 30 – 500 kHz, and transmitting up to 40 feet, the GC-BL2 is the obvious solution to any IR signal strength problem.
The GC-BL2 employs a standard 3.5mm stereo plug and 6ft cable for easy connection and installation for use with the GC-100 Network Adapter.
A variety of 3.5mm stereo extension cables, to reach longer runs to a desired location in an installation.
A variety of shielded RCA video extension cables, to reach longer runs to a desired location in an installation.
The GC-CGX is used to connect a Global Cache IR output (GC-100 or iTach) to a Xantech IR input. Global Cache IR outputs are converted to meet the IR input requirements for a Xantech IR distribution environment. IR signals from 30KHz to 72KHz can now be sent through an existing Xantech IR installation directly from one of our units. The GC-CGX is optically isolated to ensure circuit isolation and protection.
Converts Xantech and Xantech compatible IR emitter output voltages to the proper levels required by the Global Caché GC-IRE IR Extender.
The Global Cache FL2E1B is an all in one cable for the iTach Flex devices. It contains two infrared emitters and one infrared blaster all in one useful cable.Simply plug the FL2E1B into your Flex device then connect to the equipment you want to control.
** Please note that the FL2E1B is for the Global Cache iTach Flex devices only, it is not a generic infrared device and will not work with other infrared devices. **
The Global Cache FL3EC Three Emitter Cable is suitable for use with the iTach Flex devices. It provides three independent infrared emitter outputs to your equipment.Simply plug into your Flex, connect to your devices and set up in your app and you can control your devices simply from a single cable input.
** Please note that this device only works with the iTach Flex, it is not a standard 1 > 3 infrared splitter so will not work with other infrared devices. **
The iTach Flex Link Blaster Cable connects to the Global Port on an iTach Flex IP or Wi-Fi to provide line of sight infrared blasts to all devices in a 20 - 30 foot range. The Flex Link Blaster Cable can also be used in conjunction with the Flex Link Tri-Port cable to support the addition of up to 2 emitters to the same iTach Flex unit.
The iTach Flex provides powerful, inexpensive, and simple connectivity to almost any electrical device so it can be controlled and automated using an app on a smartphone, tablet, or any other user interface. Historically, automation and control products have been complex and expensive, used almost exclusively by the very wealthy. That changes with the easy availability of control apps on the iTunes Store and Android Marketplace, and the ability to connect almost any device in the home to a WiFi or wired network using the iTach Flex.
The extremely small footprint, slightly larger than a pack of gum, is ideally suited for transparent coupling and seamless integration to any device in homes or businesses. The Flex’s
unique hardware form, with a WiFi or network connection to a 3.5mm jack that supports almost any type of protocol translation cable, offers the ability to bridge products and systems in a way never available before.
Entertainment systems are the most common household devices to be controlled, and most of those devices respond to IR codes, the infrared commands sent by your typical remote control. Integrated tightly with the iTach Flex, is a no charge, cloud-based service instantly providing the required IR codes for the equipment being controlled. The ease-of-use and versatility of the cloud-based system ensures compatibility and expandability of any system. The Flex also offers built-in IR learning.
Once an entertainment system is under control, the next step may be the shades, or the lighting, the sprinklers, or the Jacuzzi. The iTach Flex, with its scalable and simple to use design, will connect them all at the site of the equipment, with no need for a complex rack mounted system. The iTach Flex introduces a new concept of distributed automation and control, with smart end-points that enhance and connect standalone devices, allowing for them to be accessed and controlled by apps on smartphones, tablets, you name it.
The new wired Global Cache iTach Flex IP POE is a versatile and flexible home automation solution for controlling infrared or serial devices over your network with your smart phone or tablet. This is the new model which supports Power Over Ethernet for easy and flexible installation without requiring local power supplies.
The Global Cache iTach Flex POE has various leads available including infrared emitter, infrared blaster, tri port cable and serial RS232 cable allowing for a combination of connections. You can use a Global Cache iTach Flex IP POE with an infrared tri port cable, 2 x infrared emitters and 1 x infrared blaster to control your home cinema system or connect a serial RS232 cable to take control of your lighting system. The Global Cache iTach Flex IP POE wired provides powerful, inexpensive, and simple connectivity to almost any infrared or RS232 device so it can be controlled and automated using an iPhone or Android app on a smartphone, tablet, or any other user interface.
The Global Cache iTach Flex IP POE has an extremely small footprint, slightly larger than a pack of chewing gum makes it ideally suited for transparent coupling and seamless integration to any device in homes or businesses. Great for hiding on the projector in your home cinema. The Global Cache iTach Flex’s unique hardware form, with a WiFi or network connection to a 3.5mm jack that supports almost any type of protocol translation cable, offers the ability to bridge products and systems in a way never available before. The Flex also offers built-in IR learning.
The iTach Flex provides powerful, inexpensive, and simple connectivity to almost any electrical device so it can be controlled and automated using an app on a smartphone, tablet, or any other user interface. Historically, automation and control products have been complex and expensive, used almost exclusively by the very wealthy. That changes with the easy availability of control apps on the iTunes Store and Android Marketplace, and the ability to connect almost any device in the home to a WiFi or wired network using the iTach Flex.
The extremely small footprint, slightly larger than a pack of gum, is ideally suited for transparent coupling and seamless integration to any device in homes or businesses. The Flex’s
unique hardware form, with a WiFi or network connection to a 3.5mm jack that supports almost any type of protocol translation cable, offers the ability to bridge products and systems in a way never available before.
Entertainment systems are the most common household devices to be controlled, and most of those devices respond to IR codes, the infrared commands sent by your typical remote control. Integrated tightly with the iTach Flex, is a no charge, cloud-based service instantly providing the required IR codes for the equipment being controlled. The ease-of-use and versatility of the cloud-based system ensures compatibility and expandability of any system. The Flex also offers built-in IR learning.
Once an entertainment system is under control, the next step may be the shades, or the lighting, the sprinklers, or the Jacuzzi. The iTach Flex, with its scalable and simple to use design, will connect them all at the site of the equipment, with no need for a complex rack mounted system. The iTach Flex introduces a new concept of distributed automation and control, with smart end-points that enhance and connect standalone devices, allowing for them to be accessed and controlled by apps on smartphones, tablets, you name it.
Used to connect the Global Cache iTach Flex devices to infra red devices such as TV's, BluRay Players, lighting control and much, much more! This product can be used with the Global Cache Tri-Port Adapter in order to connect three independent infra red outputs.
Connects the iTach Flex to serial RS232 devices such as lighting control, home automation, blind control and much more.
The Global Cache Itach Flex Link Relay & Sensor cable is an input/output cable for use with the iTach Flex.It provides relay outputs and sensor inputs which allow control and monitoring of a variety of devices.
External devices are connected via push-release terminal blocks. The enclosure can be mounted directly on a DIN rail, allowing for simple integration with external relays.
The iTach Flex Link Tri-Port Cable enables up to 3x iTach Emitters or 1x iTach Flex Link Blaster and 2x iTach Emitters to connect to the Global Port on an iTach Flex IP or WiFi unit.
This cable is not compatible with the original iTach series. The iTach Flex is required.
The Global Caché iTach is a family of products designed to connect almost any electrical device to a network in a matter of minutes. Product GC-CO-1010/IR provides TCP/IP connectivity to IR devices. Product GC-CO-1010/S provides TCP/IP connectivity to serial devices, and product GC-CO-1010/CC provides TCP/IP connectivity to Closed Contact devices.
The Global Caché iTach is a family of products designed to connect almost any electrical device to a network in a matter of minutes. Product GC-CO-1015/IR provides TCP/IP connectivity to IR devices. Product GC-CO-1015/S provides TCP/IP connectivity to serial devices, and product GC-CO-1015/CC provides TCP/IP connectivity to Closed Contact devices - all with power over ethernet.
The GC-IRE IR Extender is a new concept in automated controls that allows IR devices, such as remote controllers, to act as digital input devices in a networked environment.
Plugs into the RS232 port of any PC and is used to learn the full spectrum, 30KHz to 500KHz, of IR codes that control infrared driven audio/video equipment. When used in conjunction with the free utility software, learned codes are displayed, converted into other formats, and automatically copied into the Windows clipboard for easy IR database and spreadsheet creation. The stored codes can be used to control IR devices from any computer over the network.
The GC-RG1 is an IR receiver used to capture IR frequencies from 30 KHz to 80 KHz. The GC-RG1 plugs directly in the GC-IRE (GC-CO-1021) to capture and digitize IR signals.
The Global Caché GC-SC1 is a contact closure sensor. Its circuitry provides a rapid response to contact closure (4mS typ) with a slow response to contact opens (75mS typ).
The GC-SP1 is a voltage detection sensor for DC or AC voltages within an operating range of ±24 volts. The GC-SP1 provides an ON indication when a positive or negative voltage is applied as an input. Wiring polarity is not a concern since voltage detection is symmetric, as well as, optically isolated to avoid noise and ground loops often found in installations powered by multiply sources.
The GC-SV1 is a composite video detection sensor, making it ideal for determining the power state of VCRs and DVDs. It provides an ON indication during the presence of a composite video signal of the type found on the back of VCRs and DVDs. The GC-SV1 can connect directly to either "Component Video Out" (the green or Y RCA plug) or "Composite/Line Out" (the yellow or Video RCA plug) found on the back of most video equipment.
The Global Caché iTach is a family of products designed to connect almost any electrical device to a network in a matter of minutes. Product GC-CO-1005/IR provides WiFi connectivity to IR devices. Product GC-CO-1005/S provides WiFi connectivity to serial devices, and product GC-CO-1005/CC provides WiFi connectivity to Closed Contact devices.
Offering superb HD performance at a real world price, these Standard Speed HDMI cables feature superior 99.999% oxygen free quality copper and durable moulded HDMI plugs ideal for hard-wearing installations where reliability is essential. Compatible with the full range of HDMI v1.4 specifications, including full 1080p and deep colour resolutions, 3D and Audio Return Channel (ARC).
Offering superb HD performance at a real world price, these Standard Speed HDMI cables feature superior 99.999% oxygen free quality copper and durable moulded HDMI plugs ideal for hard-wearing installations where reliability is essential. Compatible with the full range of HDMI v1.4 specifications, including full 1080p and deep colour resolutions, 3D and Audio Return Channel (ARC).
Put your remote back in control and route IR commands to wherever they are needed, even around corners and inside cabinets.
Put your remote back in control and route IR commands to wherever they are needed with mulitple input / output options, even around corners and inside cabinets.
Put your remote back in control and route IR commands to wherever they are needed with mulitple input / output options, even around corners and inside cabinets.
Put your remote back in control and route IR commands to wherever they are needed with mulitple input / output options, even around corners and inside cabinets.
Put your remote back in control and route IR commands to wherever they are needed with mulitple input / output options, even around corners and inside cabinets.
Put your remote back in control and route IR commands to wherever they are needed with mulitple input / output options, even around corners and inside cabinets.
The IR Dual Blinking Wand is for use with any Keene equipment with IR capability. The emitters are
extremely tiny (just 9mm across) and are supplied with double sided
adhesive pads to affix directly to the equipment fascia. The emitters flash red as the IR signal is emitted giving visual
confirmation that the IR signal was received and transmitted correctly.
The High Power wand will operate equipment from up to 10m away.
Can also be used in the low power output sockets if required, but will
then only perform as a low power emitter.
Can be attached directly to the equipment fascia or
will work up to 4m away. Even when attached directly the equipment the wand will still respond to external source IR signals
Keene IR panel mount receivers can be mounted within AV cabinets, studded walls and ceilings. At just 30mm visible diameter this provides a discrete yet effective means of IR control wherever the equipment may be located.
Designed to be affixed directly over the IR received on your equipment, the IR side firing wand is for use with any Keene equipment with IR capability
IR standard receiver built into a single gang pattress with a frosted plate and is designed to filter and reject unwanted interference from Plasma & LCD screens to give you dependable, reliable results every single time.
Wide band receiver built into a single gang pattress with a frosted plate and is designed to filter and reject unwanted interference from Plasma & LCD screens to give you dependable, reliable results every single time.
Standard frequency IR receiver for use with Keene equipment with IR capability
A wide band frequency IR receiver for use with Keene equipment that has IR capability
A set of two (25cm) line adaptors, one with an RJ45 line socket to
a 3.5mm stereo jack plug, the other with an RJ45 line socket to a
3.5mm stereo jack socket. Designed to allow CAT5 cable to be used to extend the distance between the IR receivers and the Keene IR Distribution Kit.
Triple 3.5mm stereo jack sockets to a single 3.5mm stereo jack plug line
adaptor to enable three IR receivers to be connected into the Keene
IR Distribution Amp Kit
3.5mm stereo jack plug to 3.5mm stereo jack socket extension lead
Allows IR control signals to be distributed via conventional aerial coax cable. This option is a complete system when you have the IR Distribution Amp Kit (KE-IR-1005) - no other equipment required.
Allows IR control signals to be distributed via conventional aerial coax cable. This option is a complete system - no other equipment required.
The CR-CS2 is a simple Control System for a wide variety of connected devices. It has 16 user defined macro events stored within the unit activated via the WebGUI or by telnet, eight of which can also be activated by the external trigger connections. User defined macros can
send commands to remote devices via Ethernet, IR (x4), relay trigger (x4), or
RS-232/422/485 (x1) allowing for the control of a wide array of devices at the
push of a button. An integrated IR code learning function is also available,
allowing the user to store and re-transmit the IR codes sent by nearly any
standard IR remote. Comprehensive user control interfaces are available
including WebGUI, telnet and console (RS-232 in). Last but not least, the CR-CS2 supports Power over Ethernet (PoE) allowing it to be powered directly from a
standard PoE network switch, without the need for an external power adapter,
allowing for simple installation.
The CR-KP3 Wall Plate Control System Keypads are versatile and useful products for both system integrators and smart home users alike. These keypads can send commands to any Ethernet controlled device in your system. With 6 direct macro buttons (plus an additional 6 macros within the WebGUI control) which allows up to 16 commands to be executed within one button press, and a total of up to 128 commands capacity within the unit, this keypad can activate a set of command scenarios in a seconds. The soft and colorful LED buttons are suitable for all environments and PoE (Power over Ethernet) support allows for creative placement of the keypad within your space without concern for location near to a power source. Additionally, the integrated clock and calendar based scheduling feature allows you to trigger macros to control devices within your installation at a specific time, or on a recurring schedule.
The CR-TG1 Control Trigger Keypad is designed to be a simple and effective alternative for more complex control systems. This keypad features a set of 8 buttons which directly activate 8 trigger outputs which can be attached to any compatible control system.
The keypad’s connection cable allows the installer to extend system control to locations that are more convenient for user, such as a Meeting Room Tables, Lecterns, Podiums, etc. The CR-TG1's understated appearance makes this keypad an elegant and decorative addition to any professional AV installation.
A wireless IR extender for controlling any AV source such as a cable box, satellite receiver, DVD, VCR or Hi-Fi from a distant TV, with your existing remote control, even through walls and ceilings.
Offering the ultimate in HD performance at a real world price, the High Speed with Ethernet HDMI cable range features superior 99.999% oxygen free quality copper and durable moulded HDMI plugs ideal for hard-wearing installations where reliability is essential. Compatible with the full range of HDMI v2.0 specifications, including 4K, full 1080p and deep colour resolutions, 3D and Ethernet and Audio Return Channel (ARC), the High Speed with Ethernet HDMI cable range is available in lengths of 1m, 2m, 3m, 5m and 7m. For longer distances, we also offer the same cable at standard speed over 10m and 15m.
Continuing on from the outstanding popularity of our innovative Flexi-Form HDMI cable range, installers will be pleased to hear that this range has now been further enhanced to incorporate the latest HDMI v2.0 specifications enabling support for the latest 4K resolutions. Our new Flexi-Form HDMI cable range features an innovative construction that allows them to be manipulated into any desired shape that will then be retained for the duration of the install. Flexi-Form HDMI cables are manufactured from 99.999% oxygen free copper and are compatible with 3D, full 1080P and deep colour resolutions. Ideal for the custom installer looking for a neat solution when cable dressing rack-mounted HDMI devices, they are available in short lengths of 0.3m, 0.5m and 0.75m.
The
CYP HDMP-200M is a
certified Premium HDMI Cable, fully supporting 4k UHD and HDR (High Dynamic Range) AV content.
Offering the ultimate in audio visual signal transmission performance, this new fully-certified
Premium HDMI 2 metre long cable features insulated metal plugs and shielded cable, ideal for heard-wearing installations where reliability is essential.
CYP's
Premium HDMI cables are compatible with the full
range of HDMI specifications, including 4k UHD (2160p), FULL HD (1080p)
and deep colour / High Dynamic Range resolutions, 3D, Ethernet (HEC) and
ARC (Audio Return Channel).
Premium Certified HDMI Cable - Anti-Counterfeiting System:
This
new development ensures that the CYP range of professional HDMI cables
has been tested and certified to meet the requirements of Premium HDMI
cable specification.
The anti-counterfeiting label shown on the packaging of a CYP Premium
HDMI Cable has encrypted data in the QR code which will allow you to
quickly verify the authenticity of the cable by using your smart phone
with the free-to-download
HDMI Premium Cable App.
In purchasing this Premium HDMI cable, you can confidently and reliably
enjoy viewing 4k UHD content without interference or signal/connectivity
issues.
Designed to be affixed directly to the fascia on your display. Super
fast electronics and a semi-wideband capability make it really effective
to use whilst it's compact size makes it very unobtrusive. The LED
provides visual confirmation that the signal has been received.
This replacement remote control is a genuine Sky product and is compatible with Sky satellite receivers. Supplied in blister pack with batteries. Available in grey.
This replacement remote control is a genuine Sky product and is compatible with Sky satellite receivers. Supplied in blister pack with batteries. Available in grey.
This replacement remote control is a genuine Sky product and is compatible with Sky satellite receivers. Supplied in blister pack with batteries.
Compatible with all Sky+HD and Sky+HD Terabyte boxes.
The Sky Magic Eye TV Link allows you to watch Sky TV in an adjoining room.
If
you've fed your Sky TV signal to a second set in another room,
the Digi Magic Eye link lets you control the Digibox from the
second room using your existing Sky remote. Just place the Magic
Eye near the second TV and connect the transmitter to your
Digibox using RF cable (not supplied).
The
RE-EDID-4K22 is designed to manage and manipulate the HDMI/DVI EDID information
provided to a HDMI source device by a connected display. EDID contains critical
information about the capabilities of the connected display, including audio
and video format support, HDMI feature support, etc. This product aims to
simplify the technical complications that often arise when performing video
system integration, home cinema installation, integrating commercial displays
or audio/video equipment testing. It also supports EDID Emulation and
Bypass modes. This device is perfect to overcome source and screen
compatibility issues, particularly when integrating PC's into an AV system.
Designed to help protect your HDMI devices, the XA-HSP is a crucial tool when installing HDMI systems in locations where there can be power fluctuations caused by unstable mains power or where the site is susceptible to earthing problems or lightning strikes. Installers feedback has identified this as an issue in some geographical locations worldwide, along with applications for test beds, outside broadcast vehicles, old buildings such as places of worship, and for marine installations to name a few examples. As a completely passive device, there is no need for a PSU to be connected and thus simply connecting the XA-HSP in-line on the HDMI signal path will protect all HDMI equipment from voltage surges.
The XA-HSP is HDCP2.2 compliant and will support 4K/UHD resolutions including HDR. In addition, 3D Video signals and High Definition Audio formats such as LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus, Dolby Atmos and DTS-HD Master Audio are also supported.
