The EL-21SY switcher accepts two HDMI inputs and allows the user to
switch between two input sources to provide a single HDMI output for
connection to the HDMI display. This switcher has an auto-detect
function which will switch the unit when a source which is powered ‘On’.
Alternatively, the input can be selected manually using the input
selection button on the device.
The EL-31SY switcher allows the user to input three HDMI sources and switch between these sources to provide a single HDMI output to a display. This switcher can be controlled via the supplied remote control or by using the input switching button on the front of the device.
The EL-41PIP is an advanced 4 Way HDMI switch with integrated Multi-view (Picture In Picture) technology. This plug and play solution offers advanced control and display options for the integration of 4 sources onto a single display. The EL-41PIP is the perfect cost effective solution for integrating CCTV or a combination of sources into any single display within any commercial or residential AV installation.
The EL-41SY switcher allows the user to input four HDMI sources and switch between these sources to provide a single HDMI output to a display. This switcher has an auto-detect function which will switch the unit when a source which is powered ‘On’. It can also be controlled via the supplied remote control or by using the input switching button on the front of the device.
The EL-42S switcher allows the user to input four HDMI sources and switch between these sources to display HD content on 2 displays. This switcher can be controlled via the supplied remote control, RS-232, or by using the input switching button on the front of the device.
The EL-5400 is a HDMI, VGA, and Display Port
presentation switcher with added 3D to 2D conversion capabilities. This device
can scale and switch HDMI, DisplayPort, PC and Component inputs to its HDMI
output, with their associated audio signals to the native resolutions supported by the connected display. Control is via the IR remote, or
RS-232 protocol.
This HDMI/DisplayPort/VGA to HDMI Scaler with HDBaseT LITE Output is designed to switch and scale up to 5 AV inputs to simultaneous HDMI and HDBaseT LITE outputs at resolutions up to 1080p/WUXGA. The HDBaseT LITE output enables the user to send the signals up to 60m over a single CAT5e/6/7 cable and supports PoC (Power over Cable) to provide power to the connected HDBaseT LITE receiver (PU-515PL-RX or PU-515PL-WPRX). Additionally, this device offers 3 analogue Line level audio inputs, a switchable Microphone input and a Line level output. The microphone input features a 48V 'Phantom' power mode for use with professional microphones. The audio DSP engine provides auto-mixing and auto-gain control to mix or reduce the background audio in order to enhance the main audio source. The system can be controlled and easily configured via WebGUI, IR remote control or RS-232. This device is an ideal solution for presentation facilities within a classroom and/or conference room.
The
EL-5500 is an advanced rack mountable HDMI, VGA, Composite, and Component presentation switcher. This
device
can scale and switch input sources to it's two HDMI
outputs, with their associated audio signals to the native resolutions
supported by the connected display. Control is via the IR remote, RS-232, IP, or via manual selection buttons. Both digital and analogue stereo audio is supported via a built-in DAC (Digital to Analogue Converter) and ADC (Analogue to Digital Converter). The EL-5500 is the perfect solution for any educational or commercial environment requiring integration of multiple sources and signal formats to two HDMI displays.
The
EL-5500-HBT is an advanced rack mountable HDBaseT, HDMI, VGA, Composite, and
Component presentation switcher. This
device
can scale and switch eight input sources to it's two HDMI
outputs and a single HDBaseT output, with their associated audio signals to the native resolutions
supported by the connected display. This presentation switch also features a switchable digital bypass output allowing any HDMI or HDBaseT input to be directly bypassed via the HDMI bypass output.
Control is via the IR remote,
RS-232, IP, or via manual selection buttons. Both digital and analogue
stereo audio is supported via a built-in DAC (Digital to Analogue
Converter) and ADC (Analogue to Digital Converter) providing flexible audio signal integration. The EL-5500-HBT is the
perfect solution for any educational or commercial environment requiring
integration of multiple sources and signal formats to three HDMI
displays.
The PU-1H3HBTE enables a single HDMI source input to be distributed to 3 HDBaseT™ outputs. The HDBaseT™ outputs allow uncompressed distribution of HDMI, LAN, PoC, and IR over a Single CAT5e/6/7 cable up to lengths of 100m. Perfect for both residential and commercial AV installations, the PU-1H3HBTE can distribute HDMI signals to 3 displays. The product also includes an additional HDMI output for increased flexibility and can also be cascaded up to 5 times to allow distribution to potentially 50 screens or more.
The PU-507RX or PU-507WPRX Receivers are recommended to utilise the functionality of the HDBaseT™ outputs of this device.
The PU-1H3HBTPL enables a single HDMI source input to be distributed to 3 HDBaseT™ Lite outputs. The HDBaseT™ Lite outputs allow uncompressed distribution of HDMI, and IR signals over a Single CAT5e/6/7 cable up to lengths of 60m. Perfect for both residential and commercial AV installations, the PU-1H3HBTPL can distribute HDMI signals to 3 displays. The product also includes an additional HDMI output for increased flexibility and can also be cascaded up to 5 times to allow distribution to more screens.
PU-515PL-RX receivers are recommended to utilise the full functionality of the HDBaseT™ LITE with PoC outputs of this device.
The PU-1H7HBTE enables a single HDMI source input to be distributed to 7 HDBaseT™ outputs. The HDBaseT™ outputs allow uncompressed distribution
of HDMI, LAN, PoC, and IR signals over a Single CAT5e/6/7 cable
up to lengths of 100m. Perfect for both residential and commercial AV
installations, the PU-1H7HBTE can distribute HDMI signals to 7 displays.
The product also includes an additional HDMI output for increased
flexibility and can also be cascaded up to 5 times to allow distribution
to potentially 50 screens or more.
PU-507RX or PU-507WPRX Receivers are recommended to utilise the functionality of the HDBaseT™ outputs of this device.
The PU-1H7HBTPL enables a single HDMI source input to be distributed to 7 HDBaseT™ Lite with PoC outputs. The HDBaseT™ Lite outputs allow uncompressed distribution of HDMI, and IR signals over a Single CAT5e/6/7 cable up to lengths of 60m. Perfect for both residential and commercial AV installations, the PU-1H7HBTPL can distribute HDMI signals to 7 displays. The product also includes an additional HDMI output for increased flexibility and can also be cascaded up to 5 times to allow distribution to more screens.
PU-515PL-RX Receivers are recommended to utilise the full functionality of the HDBaseT™ LITE with PoC outputs of this device.
The PU-2H8HBTE-AD HDBaseT switch has two HDMI inputs and eight HDBaseT outputs, plus a single HDMI output. This device allows the user to select either HDMI source for distribution to all screens simultaneously. Each HDBaseT output supports the transmission of video (resolutions up to 1080p Full HD, plus 4K Ultra High Definition, and 1920x1200@60Hz), multi-channel audio, single LAN serving, and control via 2-way IR, RS-232 or Web GUI/Telnet IP over a single CAT5e/6/7 cable (up to 100m). The HDMI output supports the same video resolutions and high definition audio via certified HDMI cables up to 15m.
For additional flexibility, the PU-2H8HBTE-AD is provided with Audio De-Embedding functionality allowing easy audio integration into a wider AV system or direct connection to an AVR. Audio outputs are via a single Optical connection or an Analogue Stereo output (2x RCA).
The HDBaseT outputs are designed to be used with any compatible HDBaseT Receiver as follows: PU-507RX / PU-507RX-2H / PU-507RX-SCD / PU-507WPRX / PU-1109RX. These Receivers support Power over Cable (PoC) function so do not require a separate PSU for power.
Use the LAN serving capabilities of this switch to add internet connectivity to every HDBaseT output zone. In addition, this switch also features IP control allowing users to access and control the matrix remotely and also allow additional options for integration of third-party control systems such as Control 4.
The PU-507WPRX allows uncompressed HDMI signals and IP data to be transmitted over a Single CAT5e/6/7 cable. This device features full 5Play™ convergence allowing the distribution of Video, Audio, LAN serving, Power over Cable (PoC), RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres. This wall plate variant of the PU-507RX receiver enables seamless integration into a standard double-gang back box.
The PU-514L-RX is a Receiver Unit designed to be used with PU-514L-TX Transmitter, and any compatible HDBaseT™ Matrix or Distribution Amplifier. It allows uncompressed HDMI, and 2-way IR signals to be received via a Single CAT5e/6/7 cable to distances of up to 60m. Utilise the USB power output from a TV as an optional way of powering
the PU-514L-RX receiver unit alternative to a mains power supply.
Compatible devices:
PU-514L-TX / PU-44XL-KIT / PU-4H4HBTL / PU-8H8HBTE / PU-8H8HBT / PU-8H8HBTL
Specific feature compatibility may vary dependant on the transmission device.
The PU-Q1H8CS has 1 HDMI input and 8 Single CAT6 outputs to simultaneously distribute a HDMI source to eight displays up to a distance of 40m. This solution is perfect for distributing the HDMI source content over longer distances than is usually achievable with HDMI cable, using cost effective CAT6 cable infrastructure.
Use the PU-107RX Single CAT6 to HDMI Receivers on each of the eight CAT6 outputs to convert back from CAT6 to HDMI for connection to the display/s.
The QU-12D is a high performance, HDCP compliant, DVI distribution amplifier allowing one DVI input to be distributed to two displays simultaneously. Each of the buffered outputs can run up to 15 meters (8-bit) and can be cascaded up to 3 layers.
The QU-16E-4K is a versatile 1 to 16 HDMI distribution amplifier. This product is designed to be used in a 19” rack and will distribute uncompressed HDMI signals up to 4K resolutions. Each buffered output can run 1080p/8-bit up to 10 metres and can be cascaded up to two layers.
The QU-8MS Distribution Amplifier (splitter) accepts one HDMI input and splits this signal to eight identical outputs. This device is 3D compatible and features a 3D signal indicator which confirms when a 3D source signal is detected. The System Reset Function switch generates a command every 10 minutes to the connected displays which resets them to the correct HDMI input. Each buffered output can run 1080p/8-bit up to 15 metres and can also be cascaded in multiple layers.
The PU-1H2BTE splitter accepts 1x HDMI input and distributes to 2 HDBaseT™ outputs, plus 1 HDMI bypass output. The HDBaseT™ outputs allow uncompressed HDMI, LAN, PoE, IR, and RS-232 signals to be transmitted over a Single CAT5e/6/7 cable up to 100m. Installers can confidently distribute HDMI signals to 3 displays, and if required, use the HDMI bypass output to cascade the HDMI signal up to 5 times with additional HDBaseT™ splitters.
PU-507RX Receivers are recommended to utilise the full 5-Play™ functionality of the HDBaseT™ outputs of this device.
The
EL-21PIP is an advanced 2 Way HDMI switch with integrated Multi-view
(Picture In Picture) technology. This plug and play solution offers
advanced control and display options for the integration of 2 sources
onto a single display. The EL-21PIP is the perfect cost effective
solution for integrating a combination of sources into any
single display within any commercial or residential AV installation.
This 4-Way HDMI Switcher is designed to enable the user to switch between any of the four connected HDMI sources to send video and audio to a single HDMI display. This switcher fully supports 4K resolutions and is HDMI2.0 and HDCP 2.2 compliant, ensuring maximum compatibility with the latest 4K UHD sources and displays. The EL-41HP-4K22 supports all the latest features of the HDMI 2.0 specification such as 4K UHD resolutions (4K2K@60Hz - YUV4:4:4),HDR (High Dynamic Range), 'Deep Color', and High Definition audio. In addition, this switcher also features an Auto-Switching function which detects the last active input and switches to this input automatically for display. The management of source/sink configurations can be easily controlled via the on-board WebGUI LAN control, IR remote control and RS-232.
This 4-Way HDMI Switcher is designed to enable the user to switch between any of the four connected HDMI sources to send video and audio to a single HDMI display. This switcher fully supports 4K resolutions and is HDMI2.0 and HDCP 2.2 compliant, ensuring maximum compatibility with the latest 4K UHD sources and displays. The EL-41S-4K22 supports all the latest features of the HDMI 2.0 specification such as 4K UHD resolutions (4K2K@60Hz - YUV4:4:4),HDR (High Dynamic Range), 'Deep Color', and High Definition audio. In addition, this switcher also features an Auto-Switching function which detects the last active input and switches to this input automatically for display. Control is via IR remote control and RS-232.
The EL-42PIP is a High Performance HDMI switch with integrated scaling and multi-view (PIP) technology. This unit id the ideal solution for monitoring or displaying multiple sources simultaneously, making it highly suited for corporate, commercial or classroom environments.
Any one of the four HDMI sources can be displayed individually in full screen mode, or displayed in a umber of pre-configured formats in the PIP mode. Management of the input sources routing, position and sizing can be controlled easily using the OSD, WebGui or front panel controls. The input sources can then be outputted via the units two mirrored HDMI outputs. The unit also acts as a seamless switcher providing additional confidence in demanding corporate environments.
The EL-7300 is a compact and versatile presentation switch featuring Display Port, HDMI and VGA inputs. Any one of these inputs can be switched and scaled to your preference to the mirrored HDMI outputs. Independent audio signals can be routed with the VGA inputs of the switch. Audio can also be De-embedded at the output stage via the analogue or digital audio (ADC Conversion) outputs. The user can control the switch via IR remote, RS-232, WebGUI, Telnet or the front panel controls with OSD (On Screen Display). The EL-7300 is the perfect solution for any educational or corporate environment where AV system flexibility is essential.
This HDMI/DisplayPort/VGA to HDMI Scaler with HDBaseT LITE Output is designed to switch and scale up to 5 AV inputs to simultaneous HDMI and HDBaseT LITE outputs at resolutions up
to 1080p/WUXGA. The HDBaseT LITE output enables the user to send the
signals up to 60m over a single CAT5e/6/7 cable and supports PoH (Power
over HDBaseT 48v) to provide power to the connected HDBaseT LITE receiver
(PUV-1230PL-RX, PUV-1210PL-RX). Additionally, this device offers 3
analogue Line level audio inputs, Optical, Digital Coax and a Line level output.
Beyond video switching and scaling, this
unit is also supports Optical Audio Return (OAR). This
feature enables optical audio sent from a compatible HDBaseT Receiver
to this unit for local playback. An integrated audio DSP with gain control for
routing audio and controlling background audio levels adds to the versatility
of this Presentation Switch.
The system can be controlled and easily configured via WebGUI, IR remote control or RS-232. This device is an ideal solution for presentation facilities within a classroom, conference room or corporate meeting space.
The
EL-7500V is an advanced rack-mountable HDMI, VGA, Composite and
Component presentation switcher. This
device
can scale and switch input sources to its HDMI, VGA and HDBaseT™ outputs, with their associated audio signals to the native resolutions
supported by the connected display. Control is via the IR remote,
RS-232, IP, WebGUI or via manual selection buttons with OSD (On Screen Display). Both digital and analogue
stereo audio is supported via a built-in DAC (Digital to Analogue
Converter) and ADC (Analogue to Digital Converter).
The HDBaseT output provides great versatility to extend your audio and video up to 70 metres over a single run of
Cat.5e/6/7 cable. The HDBaseT output can provide 48V PoH power to compatible
HDBaseT Receivers.
The EL-7500V is the
perfect solution for any educational or commercial environment requiring
integration of multiple sources and signal formats to multiple simultaneous output formats.
The OR-HD62CD allows HDMI signals to be routed from any of the six connected HDMI sources for display on two connected HDMI displays. With fast switching technology this device dramatically improves the sync time to the connected HDMI displays over traditional switchers. In Matrix Mode, it allows any source to be routed independently to any output. An on-board EDID management tool (via on screen display) can be utilised for advanced audio and video signal management. In addition, this switcher also includes a cutting edge Picture in Picture (PIP) preview mode allowing the user to show 5 unselected HDMI sources in a row of small windows overlaid on top of the primary selected HDMI source video . In preview mode, both HDMI outputs show identical feeds. Further features include the ability to de-embed Hi-Definition lossless audio via a dedicated Optical output for each HDMI output, 4K resolution support, and 3D signal support.
Control is via front panel buttons, IR remote control, RS-232, Telnet or IP control for easy integration into control systems such as Control 4.
The PU-515PL-RX allows uncompressed HDMI signals to be transmitted over a Single CAT5e/6/7 cable. This solution has the added features of RS-232, 2-way IR control, and Power over Cable (PoC) functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 60 metres.
The PUV-1620S-TX is designed to scale and
convert HDMI and PC video, with optional analogue audio embedding, for extension
over long distances to a compatible PUV-1600 Series HDBaseT Receiver. The HDMI input supports
resolutions up to 4K@60Hz (4:2:0) and the VGA input supports resolutions up to 1080p@60Hz/WUXGA@60Hz. The scaled HDBaseT output supports resolutions from 640×480@60Hz up to
4K@60Hz (4:2:0, 8-bit) and provides the ability to adjust the image with a
number of fine tuning options including: contrast, brightness, hue, saturation,
sharpness, noise reduction, and RGB levels.
In addition, this unit supports 7.1
channel LPCM digital audio as well as advanced Bitstream and HD Bitstream audio
formats via the HDMI input, or analog stereo audio may be embedded from the stereo mini-jack connector. Shortcut keys are provided to quickly
change the output resolution to 1080p or XGA when needed for quick connection
to a display or for troubleshooting purposes.
The unit can be powered
locally or via 48V PoH (Power over HDBaseT) from a compatible HDBaseT Receiver,
which allows for greater flexibility in commercial installations. The unit can be
controlled via front panel buttons with a comprehensive OSD.
The QU-10-4K22 Distribution Amplifier (splitter) accepts one HDMI input and splits this signal to ten identical outputs. This device supports 4K2K Ultra-High Definition video with HDMI2.0 and HDCP2.2 compliance. In addition, 3D Video signals and High Definition Audio formats such as LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus, Dolby Atmos and DTS-HD Master Audio, audio sampling rate up to 192kHz are also supported. Each buffered output can run 1080p/8-bit up to 20 metres and can also be cascaded up to 3 layers.
The QU-12S Distribution Amplifier (splitter) accepts one HDMI input and splits this signal to two identical outputs. This device is compatible to v1.3 HDMI specifications, supporting ‘Deep Colour’ together with High Definition Audio. Each buffered output can run 1080p/8-bit up to 20 metres and can also be cascaded up to 3 layers.
The QU-14S Distribution Amplifier (splitter) accepts one HDMI input and splits this signal to four identical outputs. This device is compatible to v1.3 HDMI specifications, supporting ‘Deep Colour’ together with High Definition Audio. Each buffered output can run 1080p/8-bit up to 20 metres and can also be cascaded up to 3 layers.
The QU-18S Distribution Amplifier (splitter) accepts one HDMI input and splits this signal to eight identical outputs. This device is compatible to v1.3 HDMI specifications, supporting ‘Deep Colour’ together with High Definition Audio. Each buffered output can run 1080p/8-bit up to 20 metres and can also be cascaded up to 3 layers.
The QU-2-4K22 Distribution Amplifier (splitter) accepts one HDMI input
and splits this signal to two identical outputs. This device supports
4K2K Ultra-High Definition video with HDMI2.0 and HDCP2.2 compliance. In
addition, 3D Video signals and High Definition Audio formats such as
LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus, Dolby Atmos and DTS-HD
Master Audio, audio sampling rate up to 192kHz are also supported.
The QU-28S-4K22 is an advanced signal distribution tool providing high performance audio and video support including HDR and other features defined by the HDMI 2.0a specification. 4K HDR video sources, up to and including 4K@60Hz (4:4:4, 8-bit) as well as 10/12-bit sources with HDR, are able to be distributed across the 8 outputs. Pass-through of multiple digital audio formats such as LPCM 7.1, Bitstream and advanced HD Bitstream with audio sampling rates up to 192kHz are also supported. An independent HDCP management engine for each output ensures stable HDCP performance.
This Distribution Amplifier also includes a special “Group Mode” which allows the unit to function as two independent 1×4 splitters. When Group Mode is enabled, each of the 2 HDMI inputs are routed to their own discrete set of 4 outputs.
When a mixture of displays with different specifications are connected, each output can be configured to scale 4K to 1080p or apply color space conversion (4:4:4 to 4:2:0), as appropriate. Support for the CEC “active source” can be enabled command to periodically reset input selection on CEC compatible connected displays. This unit provides an intuitive set of front panel controls with an OSD as well as RS-232 control options.
This QU-4-4K22 is more than just a Distribution Amplifier, it provides high performance audio and video support including HDR and other
features defined by the HDMI 2.0a specification. 4K UHD HDMI video sources, up
to and including 4K@60Hz (4:4:4, 8-bit) as well as 10/12-bit sources with HDR,
are able to be 'Split' to the 4 x HDMI outputs. Pass-through of multiple digital
audio formats such as LPCM 7.1, Bitstream and advanced HD Bitstream with audio
sampling rates up to 192kHz are also supported. An independent HDCP management
engine for each output ensures stable HDCP performance.
When a mixture of displays with different
specifications and resolutions are connected, each output can automatically scale 4K to 1080p
or apply color space conversion (4:4:4 to 4:2:0), as appropriate, based on each
connected display’s EDID requirements. CEC “active source” command can be enabled to
periodically reset input selection on CEC compatible connected displays. This unit is controlled via front-panel switches with easy
to read status LED's.
The QU-8-4K22 Distribution Amplifier (splitter) accepts one HDMI input and splits this signal to eight identical outputs. This device supports 4K2K Ultra-High Definition video with HDMI2.0 and HDCP2.2 compliance. In addition, 3D Video signals and High Definition Audio formats such as LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus, Dolby Atmos and DTS-HD Master Audio, audio sampling rate up to 192kHz are also supported. Each buffered output can run 1080p/8-bit up to 20 metres and can also be cascaded up to 3 layers.
