The PU-IP6000RX receiver allows you to receive HDMI or VGA signals over CAT5e/6/7 network cable. This extender is a multi-function receiver that supports Ultra High-Definition signals (up to 4K2K@30Hz, YUV444) for distances up to 100m. This system is perfect for both residential and commercial installation environments.
The video and audio can be transmitted via an IP network for distances up to 100m through a single network switch. The transmission distance can be further extended up to 100m between network switches and supports Gigabit networks.
This system also features bi-directional IR pass-through, analogue line level in/out, and microphone input provide the user with variety of audio options. The USB function allows the system to act like USB hub which, when combined with the VGA input/Output feature, it allows the system to be used as a KVM switch. Adding extra devices allows the user to cascade the system enabling them to extend the transmission distance without signal loss or introducing delay. Control is via On-screen Display (OSD), Telnet and WebGUI commands.
The PU-1106RX Receiver allows you to extend HDMI signals up to 40m over Twin CAT6 cabling infrastructure and use your existing Remote Control to control your source device with the included IR Receiver.
The PU-1106RX is specifically designed to be used with the PU-1106TX Transmitters.
The PU-1106TX Transmitter allows you to extend HDMI signals over Twin CAT6 cabling infrastructure and use your existing Remote Control to control your source device with the included IR Blaster.
The PU-1106TX is specifically designed to be used with the PU-1106RX Receiver.
The PU-1107RX can receive a pure digital HDMI signal over a Single CAT6 cable allowing HD Audio & 'deep colour' support. This Receiver unit is designed to be used with the PU-1107TX to extend HDMI to a single screen, and the PU-Q1H8CS Splitter for converting the splitters' single CAT6 outputs, back to HDMI for connection to your displays.
The PU-1107TX can transmit a pure digital HDMI signal over a Single CAT6 cable allowing HD Audio & 'deep colour' support. This Transmitter unit is designed to be used with the PU-107RX receiver to extend HDMI signals to a single screen, with the added benefit that it can be used with the PU-1107EX Extender, for achieving even greater distances.
The PU-507RX Receiver allows uncompressed HDMI signals and IP data to be received over a Single CAT5e/6/7 cable. This device features full 5-Play convergence allowing the distribution of Video, Audio, LAN serving, Power over Cable (PoC), RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres.
The PU-507TX Transmitter allows uncompressed HDMI signals and IP data to be transmitted over a Single CAT5e/6/7 cable. This device features full 5-Play convergence allowing the distribution of Video, Audio, LAN serving, Power over Ethernet (PoE), RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres.
The PU-507TX-1H Transmitter allows uncompressed HDMI signals and IP data to be transmitted over a Single CAT5e/6/7 cable. This device features full 5Play™ convergence allowing the distribution of Video, Audio, LAN serving, Power over Cable (PoC), RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres. This variant of the popular PU-507-TX Transmitter has a simultaneous HDMI output enabling a local HDMI display to be connected whilst simultaneously distributing the signals over a single CAT5e/6/7 to a compatible HDBaseT Receiver.
The PU-507TX-HDVGA allows VGA and uncompressed HDMI signals to be transmitted over a Single CAT5e/6/7 cable to lengths of up to 100 metres. This device features full 5-Play convergence allowing the distribution of Video, Audio, LAN serving, Power over Ethernet (PoE), RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. This transmitter allows the user to select and switch between a HDMI or VGA source whilst the integrated scaler ensures maximum resolution support for the connected display. Additionally, the PU-507TX-HDVGA utilises an auto-scan feature which detects and switches to the last active input.
The PU-507WPRX allows uncompressed HDMI signals and IP data to be transmitted over a Single CAT5e/6/7 cable. This device features full 5Play™ convergence allowing the distribution of Video, Audio, LAN serving, Power over Cable (PoC), RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres. This wall plate variant of the PU-507RX receiver enables seamless integration into a standard double-gang back box.
The PU-514L-RX is a Receiver Unit designed to be used with PU-514L-TX Transmitter, and any compatible HDBaseT™ Matrix or Distribution Amplifier. It allows uncompressed HDMI, and 2-way IR signals to be received via a Single CAT5e/6/7 cable to distances of up to 60m. Utilise the USB power output from a TV as an optional way of powering
the PU-514L-RX receiver unit alternative to a mains power supply.
Compatible devices:
PU-514L-TX / PU-44XL-KIT / PU-4H4HBTL / PU-8H8HBTE / PU-8H8HBT / PU-8H8HBTL
Specific feature compatibility may vary dependant on the transmission device.
The PU-514L-TX is a Transmitter Unit designed to be used with PU-514L-RX Receiver. This device allows uncompressed HDMI, and 2-way IR signals to be transmitted over a Single CAT5e/6/7 cable to distances of up to 60m. Utilise the USB power output from a TV as an optional way of powering
the PU-514L-RX receiver unit alternative to a mains power supply.
The PU-515PL-TX Transmitter allows uncompressed HDMI signals to be transmitted over a Single CAT5e/6/7 cable. This solution has the added features of RS-232, 2-way IR control, and Power over Cable (PoC) functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 60 metres.
The PU-607BD-RX Receiver allows uncompressed HDMI signals and IP data to be received via a Single CAT5e/6/7 cable. This solution has the added features of RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres. This Receiver is designed to be used with the PU-607BD-TX or PU-607BDWP-TX Transmitters only, which enables Bi-Directional Power over Cable (PoC) functionality.
The PU-607BD-TX Transmitter allows uncompressed HDMI signals and IP data to be transmitted over a Single CAT5e/6/7 cable. This solution has the added features of RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres. This Transmitter is designed to be used with the PU-607BD-RX and PU-607BDWP-RX Receivers only, which enables Bi-Directional Power over Cable (PoC) functionality.
The PU-607BDWP-RX Wallplate Receiver allows uncompressed HDMI signals and IP data to be received via a Single CAT5e/6/7 cable. This solution has the added features of RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres. This Receiver is designed to be used with the PU-607BD-TX and PU-607BDWP-TX Transmitters only, which enables Bi-Directional Power over Cable (PoC) functionality.
The PU-607BDWP-TX Wallplate Transmitter allows uncompressed HDMI signals and IP data to be transmitted over a Single CAT5e/6/7 cable. This solution has the added features of RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres. This Transmitter is designed to be used with the PU-607BD-RX and PU-607BDWP-RX Receivers only, which enables Bi-Directional Power over Cable (PoC) functionality.
This HDBaseT DVI over CAT5e/6/7 receiver can receive DVI video, analog audio, 2 LAN serving connections, control (RS-232 and bi-directional IR) and Power over Ethernet (PoE) over a single CAT5e/6/7 cable up to 100m. The PU-DVI1109TX transmitter can power the receiver, via the PoC function, eliminating the need for a separate power supply.
This HDBaseT DVI over CAT5e/6/7 transmitter can transmit DVI video, analogue audio, 2 LAN serving connections, control (RS-232 and bi-directional IR) and Power over Cable (PoC) over a single CAT5e/6/7 cable up to 100m. The transmitter can power the PU-DVI1109RX receiver, via the PoC function, eliminating the need for a separate power supply.
The PU-HBT-EX repeater is designed to extend the signal transmission distances of CYP HDBaseT™ Extender sets and Matrix systems by allowing the user to repeat HDBaseT™ signals a further 100m over CAT5e/6/7 cable. This device features full 5-Play™ functionality, including the highest quality 4K2K uncompressed HD video, uncompressed multi-channel audio, bi-directional control systems (IR & RS-232), Power over Cable (PoC), and Ethernet (for LAN serving & IP Control). This Repeater is designed to be used with the PU-507 and PU-1109 point-to-point Extender Kits, the PU-8H8CTX & PU-8H8CTXIR 8-Way Transmitters, and with any CYP full HDBaseT™ Matrix system (PU-8H8HBT / PU-8H8HBTE / PU-4H4HBT).
When combined with CYP HDBaseT™ distribution solutions, this Repeater gives any installer the ability to send Audio, Video, PoC, and Control signals reliably up to 200m. The PU-HBT-EX can also be cascaded twice to achieve a maximum of 300m transmission distance.
The PU-HBTE-ZE HDBaseT Zone extender is designed to allow AV integrators to easily create additional zones for any HDBaseT distribution system whilst enabling the HDBaseT pass-through signal to be extended further over CAT5e/6/7 (up to 100m). This device supports the transmission of video (resolutions up to 1080p Full HD, plus 4K Ultra High Definition, and
1920x1200@60Hz), multi-channel digital audio and control via IR, RS-232
or Web GUI/Telnet IP over a single CAT5e/6/7 cable. The Zone extender allows signals to be transmitted up to 100m from the transmitter device to the Zone extender where the signal can be routed to a local display via the HDMI output. The signal is also transmitted simultaneously via the HDBaseT output enabling it to be distributed up to 100m over CAT5e/6/7 from the zone. The PU-HBTE-ZE Zone extender utilises PoC (Power over Cable) to provide power to the connected Receiver unit, thus no requirement for a PSU on the Receiver end. This device can be cascaded multiple times to create additional zones.
In addition, the LAN functionality provides the ability to add internet connectivity to every zone which is particularly useful when connecting SMART displays.
The IR Extender and the Repeater set is perfect for controlling IR controlled source equipment over long distances. Up to five sources can be controlled using this extender set. Two sources can be controlled located locally to the repeater, whilst the remaining three sources can be controlled locally to the extender, which can be located up to 250m away via CAT5/6 cable. This system allows for the sources to be controlled by their own original remote controls, from extended distances. A 5-eye emitter accessory can be supplied for additional control of extra source equipment.
The PU-USB-KIT is a USB over
CAT5e/6 transmitter and receiver that has been developed to extend USB devices over long distances via CAT5e/6 cable infrastructure. This kit allows any USB host to send data within a 100m range while
offering up to 4 USB outputs, giving this product the ability to act
like a USB hub.
The PUV-1510RX Receiver will accept transmitted video resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT), and LAN signals up to 100m. This solution provides advanced signal management ensuring reliable results in the most demanding installation environments. All audio, video, control, and power are received simultaneously over a single CAT6a/7 cable up to 100m.
The PUV-1510TX Transmitter enables transmission of video resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT), and LAN signals up to 100m. This solution provides advanced signal management ensuring reliable results in the most demanding installation environments. All audio, video, control, and power are transmitted simultaneously over a single CAT6a/7 cable up to 100m.
The PU-1530RX Receiver will accept transmitted video resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT), OAR (Optical Audio Return), and LAN signals up to 100m. This solution provides advanced signal management ensuring reliable results in the most demanding installation environments. All audio, video, control, and power are received simultaneously over a single CAT6a/7 cable up to 100m.
The PU-1530TX Transmitter enables transmission of video resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT), OAR (Optical Audio Return), and LAN signals up to 100m. This solution provides advanced signal management ensuring reliable results in the most demanding installation environments. All audio, video, control, and power are transmitted simultaneously over a single CAT6a/7 cable up to 100m.
The PUV-2000RX Slimline Receiver supports video resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT), and LAN signals up to 100m. Utilising the latest HDBaseT™ 2.0 technology, this solution provides advanced signal management and dedicated audio pathways to ensure reliable results in the most demanding installation environments. In addition to the full 5-Play convergence, this device also incorporates OAR (Optical Audio Return) and ARC (Audio Return Channel) functions which enable audio from a compatible display to be routed back from the receiver unit to the transmitter. All audio, video, control, and power are transmitted simultaneously over a single CAT6a/7 cable up to 100m.
All of these features are encorporated into an ultra slim casing (less than 18mm thick), providing unrivalled flexibility and ease of installation.
The PUV-2000TX Slimline Transmitter enables transmission
of video resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT), and LAN signals up to 100m. Utilising the latest HDBaseT™ 2.0 technology, this solution provides advanced signal management and dedicated audio pathways to ensure reliable results in the most demanding installation environments. In addition to the full 5-Play convergence, this device also incorporates OAR (Optical Audio Return) and ARC (Audio Return Channel) functions which enable audio from a compatible display to be routed back from the receiver unit to the transmitter. All audio, video, control, and power are transmitted simultaneously over a single CAT6a/7 cable up to 100m.
All of these features are encorporated into an ultra slim casing (less than 18mm thick), providing unrivalled flexibility and ease of installation.
The PU-2010RX Slimline Receiver supports video resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT), LAN, and USB data signals up to 100m. Utilising the latest HDBaseT™ 2.0 technology, this solution provides advanced signal management and dedicated audio pathways to ensure reliable results in the most demanding installation environments. In addition to the full 5-Play convergence, this device also incorporates OAR (Optical Audio Return) and ARC (Audio Return Channel) functions which enable audio from a compatible display to be routed back from the receiver unit to the transmitter. All audio, video, control, and power are transmitted simultaneously over a single CAT6a/7 cable up to 100m.
This system also allows the connection of any USB host, enabling a USB 2.0 connection to 2 x USB ports, giving the PU-2010RX Receiver the ability to act like a USB hub.
All of these features are incorporated into an ultra slim casing (less than 18mm thick), providing unrivalled flexibility and ease of installation.
The PUV-2010TX Slimline Transmitter enables transmission of video resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT), LAN, and USB data signals up to 100m. Utilising the latest HDBaseT™ 2.0 technology, this solution provides advanced signal management and dedicated audio pathways to ensure reliable results in the most demanding installation environments. In addition to the full 5-Play convergence, this device also incorporates OAR (Optical Audio Return) and ARC (Audio Return Channel) functions which enable audio from a compatible display to be routed back from the receiver unit to the transmitter. All audio, video, control, and power are transmitted simultaneously over a single CAT6a/7 cable up to 100m.
This system also allows the connection of any USB host, enabling a USB 2.0 connection to 2 x USB ports, giving the PU-2010RX Receiver the ability to act like a USB hub.
All of these features are incorporated into an ultra slim casing (less than 18mm thick), providing unrivalled flexibility and ease of installation.
The RE-101 repeater equalises and recovers the full HDMI signal to provide an ‘as new’ signal allowing it to be repeated for extended distances and cascaded multiple times. This device uses v1.3 HDMI specifications, supporting ‘Deep Colour’ together with High Definition Audio with a high bandwidth up to 225MHz.
The RE-HDEQ is a mini HDMI equaliser enabling the user to extend their HDMI cable lengths up to 15m either side of the device. Resolution support up to 1080P 24fps and 3D compatibility makes this product a simple, yet very effective way of extending HDMI cable capabilities. Please note that the RE-HDEQ requires power to be received via the HDMI source, so it is important to ensure that the HDMI source being used is capable of providing the standard 2W power supply via HDMI as is common on many HDMI sources. For sources which do not have power via HDMI, CYP recommend the use of the RE-PI Power Inserter product, designed to be used alongside the RE-HDEQ.
The PU-IP6000TX transmitter allows you to transmit HDMI or VGA signals over CAT5e/6/7 network cable. This extender is multi-function transmitter that supports the transmission of Ultra High-Definition signals (up to 4K2K@30Hz, YUV444) for distances up to 100m. This system is perfect for both residential and commercial installation environments.
The video and audio can be transmitted via an IP network for distances up to 100m through a single network switch. The transmission distance can be further extended up to 100m between network switches and supports Gigabit networks.
This system also features bi-directional IR pass-through, analogue line level in/out, and microphone input provide the user with variety of audio options. The USB function allows the system to act like USB hub which, when combined with the VGA input/Output feature, it allows the system to be used as a KVM switch. Adding extra devices allows the user to cascade the system enabling them to extend the transmission distance without signal loss or introducing delay. Control is via On-screen Display (OSD), Telnet and WebGUI commands.
The IP-7000 series allows installers to configure a unique signal distribution system via a dedicated IT Network Infrastructure. You are in control when deciding how many inputs and end-points you require from the system; whether it be one transmitter to many receivers or many to many, your possibilities are endless. Simplicity is at the core of the IP-7000 as both the transmitter and receiver support PoE.
The video and audio can be transmitted via an IP network for
distances up to 100m through a single network switch. The transmission
distance can be further extended up to 100m between network switches and
supports Gigabit networks.
This system also
features bi-directional IR pass-through, analogue line level in/out,
and microphone input provide the user with variety of audio options. The
USB function allows the system to act like USB hub which, when combined
with the VGA input/Output feature, it allows the system to be used as a
KVM switch. Adding extra devices allows the user to cascade the system
enabling them to extend the transmission distance without signal loss or
introducing delay. Control is via On-screen Display (OSD), Telnet, IR
Remote, WebGUI and RS-232 commands.
The IP-7000 series allows installers to configure a unique signal distribution system via a dedicated IT Network Infrastructure. You are in control when deciding how many inputs and end-points you require from the system; whether it be one transmitter to many receivers or many to many, your possibilities are endless. Simplicity is at the core of the IP-7000 as both the transmitter and receiver support PoE.
The video and audio can be transmitted via an IP network for distances up to 100m through a single network switch. The transmission distance can be further extended up to 100m between network switches and supports Gigabit networks.
This system also features bi-directional IR pass-through, analogue line level in/out, and microphone input provide the user with variety of audio options. The USB function allows the system to act like USB hub which, when combined with the VGA input/Output feature, it allows the system to be used as a KVM switch. Adding extra devices allows the user to cascade the system enabling them to extend the transmission distance without signal loss or introducing delay. Control is via On-screen Display (OSD), Telnet, IR Remote, WebGUI and RS-232 commands.
The IP-CS7 is a powerful and flexible installation solution for controlling the CYP range of IP-6000's and IP-7000's. It is capable of simultaneously managing multiple IP extenders across the same network. The unit only requires installation within your network to start the configuration process. The IP-CS7 will search and discover all Transmitters and Receivers on the network, enabling simple configuration of a uni-cast or multicast installation.
When using the IP-CS7 WebGui, it is possible to define and control all of the TX/RX's on the network. It also allows the user to create pre-determined switching groups or presets for added control. The on board set up 'Wizard' adds simplicity to the installation process, guiding the installer through the setup and control features of the unit.
Dual LAN connectivity on the device allows the system to run on a bespoke IP network whilst the additional LAN allows for connection to a secondary network for control and configuration. This is particular useful when access maybe prohibited via the LAN network, the IP-CS7 provides a direct link to the IP video network.
Using the WebGui the user has access to a 'Monitor & Control' area for simple drag and drop control and switching of sources. In this mode the user can see a preview of the content being delivered from the source. The system setup area of the WebGui has protected access rights so to prevent any changes being made to the system by other users. An alternative control method of the device can be achieved by using the Trigger Input interface. This interface allows the user to activate pre-defined functions or presets at the touch of a button. Standard control of the device can be achieved using RS-232, Telnet and the WebGui.
Power Supply unit for the Active VGA Balun II Kit which allows VGA or component video to be transmitted via cost efficient unshielded copper twisted cable in a point-to-point configuration. The product supports remote power pass-thru and is DDC compliant with all “plug-and-play” laptops, PCs and displays. The product supports up to 1920 x 1440 pixels and 1080p resolution and features manual gain adjustment and local monitor output for added versatility.
Applications include; Digital signage, residential, boardroom, classroom, medical imaging video systems.
The VGA 1x4 Distribution Hub allows one (1) VGA (RGBHV) source to be distributed up to up to four (4) displays via Cat5/6 cable for more cost-efficient cabling. The hub works in conjunction with the Active VGA Balun II Kit (500140) and Active VGA Balun II Receivers (500142).
At least one (1) 500140 is required to support one (1) display. Up to three (3) additional 500142 may be added to support up to three (3) additional displays.
The Active VGA Managed Dispatcher Hub (500170/171) distributes one (1) VGA and one (1) stereo audio channel via Cat5e/6 to up to eight (8) or sixteen (16) displays depending on the model. Designed for digital signage applications, the 500170 works in conjunction with the Active VGA Managed Receiver (500174) to support Cat5e/6 cable. Additionally the Active VGA Managed Repeater (500172) hub may be cascaded for increased distance. The overall system allows RS232 commands to be sent to remote displays.
The Active VGA Managed System (AVM) is a total cabling solution that allows digital signage systems to be installed and managed more efficiently via a Cat5e/6 structured cabling system. The solution is comprised of four components; Active VGA Managed Dispatcher Hub, Active VGA Managed Repeater Hub, active VGA Managed Receiver, and MuxLab Control Software. When used together AVM allows a network of over 256 displays to be driven up to 2,000 ft. from a single VGA/Audio source. AVM allows picture gain and skew to adjusted at each receiver and custom scripts may be sent to each displays to control time of day on/off.
The Active VGA Managed Receiver (500174) works in conjunction with the Active VGA Managed Dispatcher or Repeater Hubs to converter from Cat5e/6 back to native VGA and stereo audio. The receiver feature dual-VGA outputs and is designed with a built-in VESA mounting plate for ease of installation behind LCD displays.
The HDMI Econo Plus Extender Kit allows HDMI equipment to be connected up to 150ft (45m) via dual Cat5e twisted pair cable in a point-to-point configuration at 1080p resolution. The product also supports 1080p Deep Color up to 90ft (27m) via Cat6 cabling. The kit comes with one (1) transmitter, one (1) receiver and one (1) power supply. This unit is powered from the receiver unit (display side) only.
The HDMI Passive Extender Kit allows HDMI equipment to be connected up to 100ft (30m) over dual Cat5e unshielded twisted pair cables in a point-to-point configuration at full 1080p resolution. The distance of this product can be extended at 1080p up to 150ft (45m) via dual Cat6 cabling. This kit comes with one (1) transmitter and one (1) receiver and does not require power at either end powering itself from the voltage contained within a HDMI signal.
The HDMI over Coax Extender Kit allows an HDMI source to be connected to an HDMI receiver up to 250 ft (76m) at 1080p resolution via one coax cable in a point-to-point configuration. Furthermore, the product may be cascaded via the HDMI-over-Coax Receiver (500465-RX) in order to support multi-display applications.
The HDMI over IP Extender allows an HDMI source to be connected via any Ethernet LAN thereby allowing AV broadcasts to be set up and changed without the need to install a dedicated cabling system.
The kit includes two units; HDMI over IP Encoder (500752-TX) and HDMI over IP Decoder (500752-RX). The HDMI Encoder converts an HDMI bitstream into IP allowing it to be transmitted over an Ethernet LAN. The HDMI Decoder converts the IP packets back to the original HDMI bitstream for playback via an HDMI display.
The HDMI over IP Extender allows an HDMI source to be connected via
any Ethernet LAN thereby allowing AV broadcasts to be set up and changed
without the need to install a dedicated cabling system.
The kit includes two units; HDMI over IP Encoder (500752-TX - available separately) and HDMI
over IP Decoder (500752-RX). The HDMI Encoder converts an HDMI
bitstream into IP allowing it to be transmitted over an Ethernet LAN.
The HDMI Decoder converts the IP packets back to the original HDMI
bitstream for playback via an HDMI display.
The HDMI 4K over IP PoE
Extender Kit allows HDMI equipment to be extended up to 330ft (100m) up
to 4K (3840×2160) resolution @ 30Hz via one (1) Cat5e/6 cable in a
point-to-point configuration. Point-to-multipoint and
multipoint-to-multipoint configurations are also possible by connecting
several units to the same local Ethernet network, and the device
supports PoE (PD) if used with a PoE (PSE) Ethernet Switch.
The CATV Balun II allows traditional 75-ohm coaxial cable to be replaced by a single pair of Cat 5 UTP cable in the CATV, VHF and FM environments in certain applications. Used in pairs, the CATV Balun II allows broadband CATV equipment to be integrated into structured cabling systems thereby allowing CATV equipment to be moved or added to any convenient modular wall outlet.
The CATV Balun II provides a versatile cabling solution for broadband video systems used by schools, government, offices, hospitals, financial institutions, hotels and residential complexes. The CATV Balun II works in conjunction with RF splitters, combiners, amplifiers and cable modems for a total cabling solution.
The PU-515PL-RX allows uncompressed HDMI signals to be transmitted over a Single CAT5e/6/7 cable. This solution has the added features of RS-232, 2-way IR control, and Power over Cable (PoC) functionality over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 60 metres.
The PU-1210PL-RX Receiver will accept transmitted video resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT) up to 60m. This solution provides advanced signal management ensuring reliable results in the most demanding installation environments. All audio, video, control, and power are received simultaneously over a single CAT6a/7 cable up to 60m.
The PU-1210PL-TX Transmitter enables transmission of video resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT) up to 60m. This solution provides advanced signal management ensuring reliable results in the most demanding installation environments. All audio, video, control, and power are transmitted simultaneously over a single CAT6a/7 cable up to 60m.
The PU-1230PL-RX Receiver will accept transmitted video resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT), and OAR (Optical Audio Return) up to 60m. This solution provides advanced signal management ensuring reliable results in the most demanding installation environments. All audio, video, control, and power are received simultaneously over a single CAT6a/7 cable up to 60m.
The PU-1230PL-TX Transmitter enables transmission of video resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT), and OAR (Optical Audio Return) up to 60m. This solution provides advanced signal management ensuring reliable results in the most demanding installation environments. All audio, video, control, and power are transmitted simultaneously over a single CAT6a/7 cable up to 60m.
The PUV-1510RXWP Receiver will accept transmitted video resolutions up
to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over
HDBaseT), and LAN signals up to 100m. This solution provides advanced
signal management ensuring reliable results in the most demanding
installation environments. All audio, video, control, and power are
received simultaneously over a single CAT6a/7 cable up to 100m. Wall plate version designed for a UK 2-gang back box.
The PUV-1510TXWP Transmitter enables transmission of video resolutions
up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over
HDBaseT), and LAN signals up to 100m. This solution provides advanced
signal management ensuring reliable results in the most demanding
installation environments. All audio, video, control, and power are
transmitted simultaneously over a single CAT6a/7 cable up to 100m. Wall plate version designed for a UK 2-gang back box.
The PUV-1540S-RX is designed to scale and
convert HDBaseT video and audio outputting via a local HDMI output. The HDBaseT input
supports resolutions up to 4K@60Hz (4:2:0, 8-bit). The scaled HDMI output
supports resolutions from 640×480@60Hz up to 4K@60Hz and provides the ability
to adjust the image with a number of fine tuning options including: contrast,
brightness, hue, saturation, sharpness, noise reduction, and RGB levels.
Furthermore, this unit supports passing 7.1
channel LPCM digital audio as well as advanced Bitstream and HD Bitstream audio
formats. Analogue stereo audio breakout is also available (LPCM 2.0 sources
only). Shortcut keys are provided to quickly change the output resolution to
1080p or XGA when needed for quick connection to a display or for
troubleshooting purposes.
Additionally, the unit may be powered
locally or via 48V PoH (Power over HDBaseT) from a compatible HDBaseT
Transmitter (PUV-1500 Series), which allows for greater flexibility in installations. The unit
can be controlled via front panel buttons with a comprehensive OSD.
The PUV-1550SRX Receiver supports video resolutions up to 4K UHD along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT), LAN and Optical Audio Return (OAR) over a single Cat5e/6/7 cable up to 100m. While the HDBaseT input is limited
to a maximum of 4K@60Hz (4:2:0), this unit can automatically convert or scale
the input to display 4K@60Hz (4:4:4) at the receiving end depending on the detected capability of the
connected display panel. Conversely the user can downscale 4K UHD content to 1080p for simple integration of older displays. A useful troubleshooting feature of PUV-1550SRX is a 6G UHD HDMI Pattern Generator for testing locally connected displays. In addition to the full 5Play™ convergence, digital OAR
(Optical Audio Return) provides users the ability to transmit Optical Audio (48kHz) to the HDBaseT TX. The RX also features a analogue audio output providing users with total audio flexibility. The PUV-1550SRX also has on board EDID Management which is useful when troubleshooting connected displays.
The PUV-1550STX HDBaseT Transmitter/Scaler enables
transmission of video resolutions up to 4K UHD, along with HD audio,
2-Way IR, RS-232, PoH (Power over HDBaseT), and LAN signals up
to 100m. As well as a HDMI input, this unit features a local
HDMI output supporting video signals up to 4K@60Hz (4:4:4, 8-bit) and 4K@24Hz HDR. Full 4K UHD content for
transmission over the HDBaseT output signal can be converted to 4K@60Hz
(4:2:0, 8-bit) or 1080p@60Hz, in order to fit within HDBaseT
bandwidth limitations (10.2Mbps). Simple 4K UHD test patterns can also be outputted. 1080p signals can also be upscaled to 4K UHD and transmitted to the receiver. Control of remote devices is possible via bi-directional RS-232, IR
ports as well as a LAN connection. A analogue audio output provides
users with the ability to receive Optical Audio transmitted from the PUV-1550SRX or de-embed audio from the HDMI source. The PUV-1550SRX also has on board EDID Management which is useful when troubleshooting connected displays.
The PUV-1602TXWP Wallplate Transmitter is a HDMI/VGA switch which allows uncompressed HDMI and VGA signals to be transmitted over a Single CAT5e/6/7 cable. This
solution has the added features of analogue audio em-bedding, RS-232 and 2-way IR control
functionality over the same CAT5e/6/7 cable. These combined HDMI and
control signals can be transmitted up to lengths of 100 metres to a compatible PUV 1600 Series Receiver.
This unit also supports automatic input detection between the HDMI and the VGA inputs using hot plug detection, offering the user 'hands free' control of the device. Despite the 10.2Gbps bandwidth limitation of HDBaseT this clever transmitter will automatically convert signals of higher bandwidths ensuring any HDMI 4K signal can be passed through the HDBaseT system. The unit also features push button control on the front of the panel. The unit is powered by PoH supplied by a compatible PUV-1600 series receiver. The wall plate is designed to integrate within a standard UK double gang back box.
The PUV-1605S-TXWP Wallplate Transmitter is a HDMI/VGA switch which allows
uncompressed HDMI and VGA signals to be transmitted over a Single
CAT5e/6/7 cable. This
solution has the added features of analogue audio em-bedding, RS-232 and
2-way IR control
functionality over the same CAT5e/6/7 cable. These combined HDMI and
control signals can be transmitted up to lengths of 100 metres to a
compatible PUV 1600 Series Receiver.
The HDMI input supports resolutions up to 4K@60Hz (4:4:4 8-Bit). The VGA input supports resolutions up to WUXGA (RGB) and with the use of the 3.5mm audio mini-jack input, stereo audio can be em-bedded and transmitted. Despite the 10.2Gbps bandwidth limitation of HDBaseT, 4K HDMI video sources up to and including 4K@60Hz (4:4:4 8-Bit) can be scaled to your desired resolution ensuring you deliver the right signal to the display.
This unit also supports
automatic input detection between the HDMI and the VGA inputs using hot
plug detection, offering the user 'hands free' control of the device.
The unit also features push button control on the front of the panel.
The unit is powered by PoH supplied by a compatible PUV-1600 series
receiver. The wall plate is designed to integrate within a standard UK
double gang back box.
The PUV-1610RX Receiver will accept transmitted video resolutions up
to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over
HDBaseT), and LAN signals up to 100m. This solution provides advanced
signal management ensuring reliable results in the most demanding
installation environments. All audio, video, control, and power are
received simultaneously over a single CAT6a/7 cable up to 100m.
A key feature of the PUV-1600 series is that the power is sent to the TX
from the mains powered RX. This offers additional flexibility when
integrating and designing meeting room solutions.
The PUV-1610TX Transmitter enables transmission of video resolutions up
to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over
HDBaseT), and LAN signals up to 100m. This solution provides advanced
signal management ensuring reliable results in the most demanding
installation environments. All audio, video, control, and power are
transmitted simultaneously over a single CAT6a/7 cable up to 100m.
A key feature of the PUV-1600 series is that the power is sent to the TX
from the mains powered RX. This offers additional flexibility when
integrating and designing commercial AV systems.
The PUV-1620S-TX is designed to scale and
convert HDMI and PC video, with optional analogue audio embedding, for extension
over long distances to a compatible PUV-1600 Series HDBaseT Receiver. The HDMI input supports
resolutions up to 4K@60Hz (4:2:0) and the VGA input supports resolutions up to 1080p@60Hz/WUXGA@60Hz. The scaled HDBaseT output supports resolutions from 640×480@60Hz up to
4K@60Hz (4:2:0, 8-bit) and provides the ability to adjust the image with a
number of fine tuning options including: contrast, brightness, hue, saturation,
sharpness, noise reduction, and RGB levels.
In addition, this unit supports 7.1
channel LPCM digital audio as well as advanced Bitstream and HD Bitstream audio
formats via the HDMI input, or analog stereo audio may be embedded from the stereo mini-jack connector. Shortcut keys are provided to quickly
change the output resolution to 1080p or XGA when needed for quick connection
to a display or for troubleshooting purposes.
The unit can be powered
locally or via 48V PoH (Power over HDBaseT) from a compatible HDBaseT Receiver,
which allows for greater flexibility in commercial installations. The unit can be
controlled via front panel buttons with a comprehensive OSD.
The PUV-1650RX has been designed with collaboration in mind, it's the
perfect turnkey solution for receiving and switching video in commercial
applications. The PUV-1600 series not only provide total AV conversion
and extension, they also add a level of system control throughout the
meeting space. The unit includes a HDMI Input and Output
offering total meeting space compatibility.
Sources can be received from upto 100m (1080p) and 4K@60Hz (4:2:0 8-bit) and over 70m by a CAT 6/7 cable. This receiver can
scale the HDBaseT video from the source or local HDMI input to match the
connected displays resolution requirements.
The PUV-1650RX differs
from other HDBaseT extender sets with its on board control relays that can be activated in a number of ways defined by the user. This could include, IP, RS232, Trigger or Push Button control. Complimentary control products
within the CYP range include the CR-TG1, CR-CS2 & CR-KP products.
A key feature of the PUV-1600 series is that the power is sent to the TX from the mains powered RX. This offers additional flexibility when integrating and designing meeting room solutions.
The PUV-1650TX has been designed with collaboration in mind, it's the perfect turnkey solution for extending and switching video in commercial applications. The PUV-1650TX/RX not only provide total AV conversion and extension, they also add a level of system control throughout the meeting space. The unit includes HDMI, DisplayPort & VGA inputs offering total meeting space compatibility.
Sources can be transmitted upto 100m (1080p) and 4K@60Hz (4:2:0 8-bit) can be transmitted over 70m over CAT 6/7 cable. The compatible receiver can scale the HDBaseT video source or local HDMI input to match the connected displays resolution requirements.
The PUV-1650 differs from other HDBaseT extender sets with its additional layer of control. This unit provides an interface for a remote control keypad or trigger interface which could be placed in a variety of installation scenarios (Lecterns, meeting room tables, podiums, etc...). This interface allows the user to control a wide range of devices and macro commands from the touch of a button over the local network. Complimentary control products within the CYP range include the CR-TG1 & CR-KP products.
The TX also features 'Top Panel' controls for direct control of the device (with OSD) and the added benefit of a WebGUI, RS232 and LAN control. Using the WebGUI interface timed events can be stored on the unit for added system control.
A key feature of the PUV-1600 series is that the power is sent to the TX
from the mains powered RX. This offers additional flexibility when
integrating and designing meeting room solutions.
The new PUV-1710LRX-AVLC Receiver enables video resolutions up
to 4K UHD including 10/12-bit HDR & Dolby Vision, to be received along with HD audio, 2-Way IR, RS-232, PoH (Power over
HDBaseT) signals from a distance of 70m. This
solution provides advanced signal management ensuring reliable results
in the most demanding installation environments. All audio, video,
control, and power are received simultaneously over a single CAT6a/7
cable up to 70m.
Despite the 10.2Gbps limitation of HDBaseT™
technology, this groundbreaking product enables data rates of up to
18Gbps to be received using AVLC (Adaptive Visually Lossless
Compression) Technology. The receiver enables 4KUHD sources up-to and
including 4K@60Hz (4:4:4 8-bit) as well as 10/12 bit sources with HDR
(Including Dolby Vision) to be received over distance from a compatible transmitter. The
result is a perfect 6G 4K visually lossless image delivered to the display
screen.
The new PUV-1710LTX-AVLC Transmitter enables video resolutions up
to 4K UHD including 10/12-bit HDR & Dolby Vision, to be transmitted along with HD audio, 2-Way IR, RS-232, PoH (Power over
HDBaseT) signals up to a distance of 70m. This
solution provides advanced signal management ensuring reliable results
in the most demanding installation environments. All audio, video,
control, and power are transmitted simultaneously over a single CAT6a/7
cable up to 70m.
Despite the 10.2Gbps limitation of HDBaseT™ technology, this groundbreaking product enables data rates of up to 18Gbps to be transmitted using AVLC (Adaptive Visually Lossless Compression) Technology. The transmitter enables 4KUHD sources up-to and including 4K@60Hz (4:4:4 8-bit) as well as 10/12 bit sources with HDR (Including Dolby Vision) to be extended to a compatible receiver. The result is a perfect 4K 6G visually lossless image delivered to the display screen.
The new PUV-1730LRX-AVLC Receiver enables video resolutions up
to 4K UHD including 10/12-bit HDR10 & Dolby Vision, to be received along with HD audio, 2-Way IR, RS-232, PoH (Power over
HDBaseT) signals from a distance of 70m. This
solution provides advanced signal management ensuring reliable results
in the most demanding installation environments. All audio, video,
control, and power are received simultaneously over a single CAT6a/7
cable up to 70m. Using the OAR (Optical Audio Return) feature, audio can be sent from the display or local source back to the TX.
Despite the 10.2Gbps limitation of HDBaseT™
technology, this groundbreaking product enables data rates of up to
18Gbps to be received using AVLC (Adaptive Visually Lossless
Compression) Technology. The receiver enables 4KUHD sources up-to and
including 4K@60Hz (4:4:4 8-bit) as well as 10/12 bit sources with HDR
(Including Dolby Vision) to be received over distance from a compatible transmitter. The
result is a perfect 6G 4K visually lossless image delivered to the display
screen.
The new PUV-1730LRX-AVLC Transmitter enables video resolutions up
to 4K UHD including 10/12-bit HDR10 & Dolby Vision, to be transmitted
along with HD audio, 2-Way IR, RS-232, PoH (Power over
HDBaseT) signals from a distance of 70m. This
solution provides advanced signal management ensuring reliable results
in the most demanding installation environments. All audio, video,
control, and power are received simultaneously over a single CAT6a/7
cable up to 70m. Using the OAR (Optical Audio Return) feature, audio can
be received from the display and de-embedded from this Transmitter.
Despite the 10.2Gbps limitation of HDBaseT™
technology, this groundbreaking product enables data rates of up to
18Gbps to be received using AVLC (Adaptive Visually Lossless
Compression) Technology. The receiver enables 4KUHD sources up-to and
including 4K@60Hz (4:4:4 8-bit) as well as 10/12 bit sources with HDR
(Including Dolby Vision) to be received over distance from a compatible transmitter. The
result is a perfect 6G 4K visually lossless image delivered to the display
screen.
The new PUV-1810RX-AVLC Receiver enables video resolutions up
to 4K UHD including 10/12-bit HDR & Dolby Vision, to be received along with HD audio, 2-Way IR, RS-232, PoH (Power over
HDBaseT) and LAN signals from a distance of 100m. This
solution provides advanced signal management ensuring reliable results
in the most demanding installation environments. All audio, video,
control, and power are received simultaneously over a single CAT6a/7
cable up to 70m.
Despite the 10.2Gbps limitation of HDBaseT™
technology, this groundbreaking product enables data rates of up to
18Gbps to be received using AVLC (Adaptive Visually Lossless
Compression) Technology. The receiver enables 4KUHD sources up-to and
including 4K@60Hz (4:4:4 8-bit) as well as 10/12 bit sources with HDR
(Including Dolby Vision) to be received over distance from a compatible transmitter. The
result is a perfect 6G 4K visually lossless image delivered to the display
screen.
The new PUV-1810TX-AVLC Transmitter enables video resolutions up
to 4K UHD including 10/12-bit HDR & Dolby Vision, to be transmitted along with HD audio, 2-Way IR, RS-232, PoH (Power over
HDBaseT) and LAN signals up to a distance of 100m. This
solution provides advanced signal management ensuring reliable results
in the most demanding installation environments. All audio, video,
control, and power are transmitted simultaneously over a single CAT6a/7
cable up to 70m.
Despite the 10.2Gbps limitation of HDBaseT™
technology, this groundbreaking product enables data rates of up to
18Gbps to be transmitted using AVLC (Adaptive Visually Lossless
Compression) Technology. The transmitter enables 4KUHD sources up-to and
including 4K@60Hz (4:4:4 8-bit) as well as 10/12 bit sources with HDR
(Including Dolby Vision) to be extended to a compatible receiver. The
result is a perfect 4K 6G visually lossless image delivered to the
display screen.
The new PUV-1830RX-AVLC Receiver enables video resolutions up
to 4K UHD including 10/12-bit HDR & Dolby Vision, to be received along with HD audio, 2-Way IR, RS-232, PoH (Power over
HDBaseT) and LAN signals from a distance of 100m. This
solution provides advanced signal management ensuring reliable results
in the most demanding installation environments. All audio, video,
control, and power are received simultaneously over a single CAT6a/7
cable up to 70m. Using the OAR (Optical Audio Return) feature, audio can be sent from the display or local source back to the TX.
Despite the 10.2Gbps limitation of HDBaseT™
technology, this groundbreaking product enables data rates of up to
18Gbps to be received using AVLC (Adaptive Visually Lossless
Compression) Technology. The receiver enables 4KUHD sources up-to and
including 4K@60Hz (4:4:4 8-bit) as well as 10/12 bit sources with HDR
(Including Dolby Vision) to be received over distance from a compatible transmitter. The
result is a perfect 6G 4K visually lossless image delivered to the display
screen.
The new PUV-1830TX-AVLC Transmitter enables video resolutions up
to 4K UHD including 10/12-bit HDR & Dolby Vision, to be transmitted along with HD audio, 2-Way IR, RS-232, PoH (Power over
HDBaseT) and LAN signals up to a distance of 100m. This
solution provides advanced signal management ensuring reliable results
in the most demanding installation environments. All audio, video,
control, and power are transmitted simultaneously over a single CAT6a/7
cable up to 70m. This unit also features OAR (Optical Audio Return) allowing the user to extract Optical Audio transmitted from the HDBaseT Receiver.
Despite the 10.2Gbps limitation of HDBaseT™
technology, this groundbreaking product enables data rates of up to
18Gbps to be transmitted using AVLC (Adaptive Visually Lossless
Compression) Technology. The transmitter enables 4KUHD sources up-to and
including 4K@60Hz (4:4:4 8-bit) as well as 10/12 bit sources with HDR
(Including Dolby Vision) to be extended to a compatible receiver. The
result is a perfect 4K 6G visually lossless image delivered to the
display screen.
The
PUV-2010RXWP UK Wall Plate Receiver supports video resolutions up to 4K UHD,
along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT), LAN,
and USB data signals up to 100m. Utilising the latest HDBaseT™ 2.0
technology, this solution provides advanced signal management and
dedicated audio pathways to ensure reliable results in the most
demanding of installation environments. In addition to the full 5-Play
convergence, this device also incorporates OAR (Optical Audio Return)
and ARC (Audio Return Channel) functions which enable audio from a
compatible display to be routed back from the receiver unit to the
transmitter. All audio, video, control, and power are transmitted
simultaneously over a single CAT6a/7 cable up to 100m.
This system also allows the connection of any USB host, enabling a USB 2.0 connection to 2 x USB ports, giving the PU-2010RXWP Receiver the ability to act as a USB hub.
This wall plate variant of the PUV-2010RX receiver enables seamless integration into a standard UK double-gang back box.
The RE-101-4K22 is designed to enhance and stabilize high-bandwidth HDMI signals, allowing the user to extend a UHD 4K, HDMI 2.2 signal an additional 5m whilst also providing the function of customized EDIDs. The
built in EDID management support allows the user to easily switch between three
distinct EDIDs (Internal, External, and User). With the use of the optional PC
software it is possible to create, edit, upload or download the customized User
EDID. The unit’s toggle switch and simple LED design allows the user to
quickly switch between different configurations while viewing EDID status
information.
The SDV-FRX/FTX Transmitter and Receiver set are designed to deliver high-quality, IP routable, AV extension with minimum latency. By
using a sophisticated ultra-light compression technology (lossless for most
content) it’s the perfect solution for extending 4K audio/video signals (HDMI or
DisplayPort) and data over long distance. Advanced HDMI content such as HDR (High Dynamic Range),
10-bit color and multi-channel HD Bitstream audio can be transmitted in
pass-through mode. The use of interchangeable, field replaceable, SFP+ modules
allows for transmission distances of up to 30km (Maximum transmission distance
depends on the SFP+ modules used.). Multiple control and data signals may also
be transmitted along with the audio and video, including IR, RS-232, USB (for
KVM) and Ethernet.
When combined with the optional control software, the functionality of the extenders expands
exponentially. Multiple Transmitters and Receivers may be combined with one or
more 10Gb fiber Ethernet switches and the units can be used together to form a distributed
video matrix, a multi-viewer system, or a video wall system adding to their
flexibility in large commercial installations.
The SDV-FRX/FTX Transmitter and Receiver set are
designed to deliver high-quality, IP routable, AV extension with
minimum latency. By
using a sophisticated ultra-light compression technology (lossless for
most
content) it’s the perfect solution for extending 4K audio/video signals
(HDMI or
DisplayPort) and data over long distance. Advanced HDMI content such as
HDR (High Dynamic Range),
10-bit color and multi-channel HD Bitstream audio can be transmitted in
pass-through mode. The use of interchangeable, field replaceable, SFP+
modules
allows for transmission distances of up to 30km (Maximum transmission
distance
depends on the SFP+ modules used.). Multiple control and data signals
may also
be transmitted along with the audio and video, including IR, RS-232, USB
(for
KVM) and Ethernet.
When combined with the optional control software, the functionality of the extenders expands
exponentially. Multiple Transmitters and Receivers may be combined with one or
more 10Gb fiber Ethernet switches and the units can be used together to form a distributed
video matrix, a multi-viewer system, or a video wall system adding to their
flexibility in large commercial installations.
